OD-1
The OD-1 invented the now ubiquitous “overdrive” category in stompbox effects. Designed with an asymmetrical clipping circuit that reproduces the pleasing sound of a driven tube amp, this yellow classic dishes up warm, fat tones rich with even-order harmonics. |
Page | Parameter | Setting range | Explanation |
|---|---|---|---|
1 | LEVEL | 0–100 | Adjusts the volume when the effect is used. |
OVER DRIVE | 0–100 | Adjusts how much overdrive (distortion) is applied. | |
– | – |
| |
2 | CTL1 TARGET | OFF, LEVEL, OVER DRIVE | Selects the parameter to control from a footswitch connected to CTL1. |
CTL1 MODE | MOMENT, TOGGLE | Selects the operation mode for the footswitch that’s connected to CTL1. | |
CTL1 VALUE | 0–100 | Sets the value for the parameter that’s controlled from a footswitch connected to CTL1. | |
3 | CTL2 TARGET | OFF, LEVEL, OVER DRIVE | Selects the parameter to control from a footswitch connected to CTL2. |
CTL2 MODE | MOMENT, TOGGLE | Selects the operation mode for the footswitch connected to CTL2. | |
CTL2 VALUE | 0–100 | Selects the value for the parameter that’s controlled from a footswitch connected to CTL2. | |
4 | EXP TARGET | OFF, LEVEL, OVER DRIVE | Selects the parameter controlled by an external expression pedal connected to the EXP jack. |
EXP MIN | 0–100 | Sets the minimum value for the parameter controlled by an expression pedal connected to the EXP jack. | |
EXP MAX | 0–100 | Sets the maximum value for the parameter controlled by an expression pedal connected to the EXP jack. | |
5 | PEDAL MODE | MOMENT, TOGGLE | Selects the operation mode for the pedal switch on the PX-1. |
ACTION | OFF Ó ON, ON Ó OFF | Sets how the pedal switch on this unit operates when PEDAL MODE is set to “MOMENT”. | |
– | – |
|