PH-1

The PH-1 produces a mild phaser sound with a full low-end response. Skillful engineering allows you to dial in a range of musical tones with a simple two-knob interface.

 

Page

Parameter

Value

Explanation

1

RATE

0–100, BPM

Adjusts how fast the phaser changes.

  • When this is set to “BPM”, you can check the tempo by watching the CHECK indicator blink, or by checking the BPM parameter.

BPM

40–250

You can only adjust the tempo if “BPM” is selected for RATE.

  • If the tempo data is being received via the MIDI IN jack, you cannot adjust the tempo using the PX-1.

DEPTH

0–100

Adjusts the depth of the phaser.

2

CTL1 TARGET

OFF, RATE, DEPTH, TAP

Selects the parameter to control from a footswitch connected to CTL1.

  • If the tempo data is being received via the MIDI IN jack, you cannot adjust the tempo using tap operations.

CTL1 MODE

MOMENT, TOGGLE

Selects the operation mode for the footswitch that’s connected to CTL1.

  • This is not shown when CTL1 TARGET is set to “TAP”.

CTL1 VALUE

0–100

Sets the value for the parameter that’s controlled from a footswitch connected to CTL1.

  • This is not shown when CTL1 TARGET is set to “TAP”.

3

CTL2 TARGET

OFF, RATE, DEPTH, TAP

Selects the parameter to control from a footswitch connected to CTL2.

  • Tap operations are disabled when there is an external MIDI input.

CTL2 MODE

MOMENT, TOGGLE

Selects the operation mode for the footswitch connected to CTL2.

  • This is not shown when CTL2 TARGET is set to “TAP”.

CTL2 VALUE

0–100

Selects the value for the parameter that’s controlled from a footswitch connected to CTL2.

  • This is not shown when CTL2 TARGET is set to “TAP”.

4

EXP TARGET

OFF, RATE, DEPTH

Selects the parameter controlled by an external expression pedal connected to the EXP jack.

EXP MIN

0–100

Sets the minimum value for the parameter controlled by an expression pedal connected to the EXP jack.

EXP MAX

0–100

Sets the maximum value for the parameter controlled by an expression pedal connected to the EXP jack.

5

PEDAL MODE

MOMENT, TOGGLE

Selects the operation mode for the pedal switch on the PX-1.

  • If TOGGLE is selected, you can long-press the pedal switch to allow tap input.

ACTION

OFF Ó ON, ON Ó OFF

Sets how the pedal switch on this unit operates when PEDAL MODE is set to “MOMENT”.

–

–