SD-1
This offers a soft and clear distortion sound, much like the overdrive sound on a vacuum tube amp. You can also use the tone control to emphasize or cut the high-frequency range and create a wide range of effects. The SD-1 faithfully conveys the dynamics of your picking and the player’s own delicate nuances, without altering the favorable tonal qualities of the guitar.
|
Page | Parameter | Value | Explanation |
|---|---|---|---|
1 | LEVEL | 0–100 | Adjusts the volume when the effect is used. |
TONE | 0–100 | Adjusts the brightness of the effect sound. Turn the knob clockwise for a brighter sound. | |
DRIVE | 0–100 | Adjusts how much overdrive (distortion) is applied. | |
2 | CTL1 TARGET | OFF, LEVEL, TONE, DRIVE | Selects the parameter to control from a footswitch connected to CTL1. |
CTL1 MODE | MOMENT, TOGGLE | Selects the operation mode for the footswitch that’s connected to CTL1. | |
CTL1 VALUE | 0–100 | Sets the value for the parameter that’s controlled from a footswitch connected to CTL1. | |
3 | CTL2 TARGET | OFF, LEVEL, TONE, DRIVE | Selects the parameter to control from a footswitch connected to CTL2. |
CTL2 MODE | MOMENT, TOGGLE | Selects the operation mode for the footswitch connected to CTL2. | |
CTL2 VALUE | 0–100 | Selects the value for the parameter that’s controlled from a footswitch connected to CTL2. | |
4 | EXP TARGET | OFF, LEVEL, TONE, DRIVE | Sets the parameter controlled by an expression pedal connected to EXP. |
EXP MIN | 0–100 | Sets the minimum value for the parameter controlled by an expression pedal connected to EXP. | |
EXP MAX | 0–100 | Sets the maximum value for the parameter controlled by an expression pedal connected to EXP. | |
5 | PEDAL MODE | MOMENT, TOGGLE | Selects the operation mode for the pedal switch on the PX-1. |
ACTION | OFF Ó ON, ON Ó OFF | Sets how the pedal switch on this unit operates when PEDAL MODE is set to “MOMENT”. | |
– | – |
|