DS-1
The DS-1 offers a variety of distortion sounds from mellow and soft to gritty and hard. |
Page | Parameter | Value | Explanation |
|---|---|---|---|
1 | TONE | 0–100 | Adjusts the tonal character of the distortion. Turning this clockwise cuts the low end and boosts the high end, for a more cutting tone. Turning this all the way counterclockwise cuts the high end and boosts the low end, for a more mellow tone. |
LEVEL | 0–100 | This adjusts the volume of the effect sound. | |
DIST | 0–100 | Adjusts the distortion depth and the sustain length at the same time. The further this is turned clockwise, the heavier the distortion effect becomes, and the longer the sound sustains. | |
2 | CTL1 TARGET | OFF, TONE, LEVEL, DIST | Selects the parameter to control from a footswitch connected to CTL1. |
CTL1 MODE | MOMENT, TOGGLE | Selects the operation mode for the footswitch that’s connected to CTL1. | |
CTL1 VALUE | 0–100 | Sets the value for the parameter that’s controlled from a footswitch connected to CTL1. | |
3 | CTL2 TARGET | OFF, TONE, LEVEL, DIST | Selects the parameter to control from a footswitch connected to CTL2. |
CTL2 MODE | MOMENT, TOGGLE | Selects the operation mode for the footswitch connected to CTL2. | |
CTL2 VALUE | 0–100 | Selects the value for the parameter that’s controlled from a footswitch connected to CTL2. | |
4 | EXP TARGET | OFF, TONE, LEVEL, DIST | Sets the parameter controlled by an expression pedal connected to EXP. |
EXP MIN | 0–100 | Sets the minimum value for the parameter controlled by an expression pedal connected to EXP. | |
EXP MAX | 0–100 | Sets the maximum value for the parameter controlled by an expression pedal connected to EXP. | |
5 | PEDAL MODE | MOMENT, TOGGLE | Selects the operation mode for the pedal switch on the PX-1. |
ACTION | OFFÓON, ONÓOFF | Sets how the pedal switch on this unit operates when PEDAL MODE is set to “MOMENT”. | |
– | – |
|