OC-2

The original OC-2 hardware was a pioneer in octave pedals, producing touch-responsive tones with an all-analog circuit and a unique method of phase inversion. It features a direct level control and knobs for introducing tones one and two octaves below the original pitch. The OC-2 works great for adding mono octave sounds to any instrument, and it’s legendary among bassists for its ability to create synth-like sub-bass tones.

MEMO

Play single, simple notes without effects applied. You may not hear the results you want when you play complex sounds or chords.

Page	Parameter	Value	Explanation
1	OCT 2	0–100	Adjusts the volume of the sound that’s two octaves below.
	DIRECT LEVEL	0–100	Adjusts the volume of the direct sound when the effect is on.
	OCT 1	0–100	Adjusts the volume of the sound that’s one octave below.
2	CTL1 TARGET	OFF, OCT 2, DIRECT LEVEL, OCT 1	Selects the parameter to control from a footswitch connected to CTL1.
	CTL1 MODE	MOMENT, TOGGLE	Selects the operation mode for the footswitch that’s connected to CTL1.
	CTL1 VALUE	0–100	Sets the value for the parameter that’s controlled from a footswitch connected to CTL1.
3	CTL2 TARGET	OFF, OCT 2, DIRECT LEVEL, OCT 1	Selects the parameter to control from a footswitch connected to CTL2.
	CTL2 MODE	MOMENT, TOGGLE	Selects the operation mode for the footswitch connected to CTL2.
	CTL2 VALUE	0–100	Selects the value for the parameter that’s controlled from a footswitch connected to CTL2.
4	EXP TARGET	OFF, OCT 2, DIRECT LEVEL, OCT 1	Selects the parameter controlled by an external expression pedal connected to the EXP jack.
	EXP MIN	0–100	Sets the minimum value for the parameter controlled by an expression pedal connected to the EXP jack.
	EXP MAX	0–100	Sets the maximum value for the parameter controlled by an expression pedal connected to the EXP jack.
5	PEDAL MODE	MOMENT, TOGGLE	Selects the operation mode for the pedal switch on the PX-1.
	ACTION	OFF Ó ON, ON Ó OFF	Sets how the pedal switch on this unit operates when PEDAL MODE is set to “MOMENT”.
	–	–