PS-2
The PS-2 is a complex effect unit that features both a pitch shifter and a digital delay in a compact size. This lets you freely shift the pitch over a range of ±1 octave. You can also select either “5” or “6” for the MODE parameter to use this unit as an octaver (±1 octave). When using the unit as a digital delay, you can freely set the delay time from 30 ms all the way up to a maximum of two seconds. |
Page | Parameter | Value | Explanation |
|---|---|---|---|
1 | BALANCE | 100:0–100:100–0:100 | Adjusts the balance between the direct sound and the effect sound. When in the center position, the direct and effect sounds are output at a 1:1 ratio. Turn the knob all the way counterclockwise to hear just the direct sound, and all the way clockwise to hear just the effect sound. |
F.BACK | 0–100 | When in delay mode, this adjusts how many times the delay sound repeats. Turn the knob all the way counterclockwise for a single delay, and clockwise for more delay repeats. When in pitch shift mode, turn the knob clockwise to increase the pitch shifting, for more of a unique pitch shift effect. | |
FINE/MANUAL | (Setting range according to the mode), BPM | For delay mode (1–3), this sets the delay time. 1: 0–100, BPM 2: 0–100, BPM 3: 0–100, BPM For pitch shift mode (4), this adjusts the amount of pitch shift. 4: -1oct–+1oct For pitch shift mode (5, 6), this knob has no effect. 5: no effect 6: no effect
| |
2 | MODE | 1: DLY125ms, 2: DLY500ms, 3: DLY2S, 4: PS MANUAL, 5: PS+1oct, 6: PS-1oct | Switches the mode. Delay mode (1–3) 1: Produces a 30–125 ms delay time. 2: Produces a 125–500 ms delay time. 3: Produces a 500 ms–2 sec delay time. Pitch shift mode (4–6) 4: Shifts the pitch within a range of -1 to +1 octaves. 5: Shifts the pitch +1 octave. 6: Shifts the pitch -1 octave. |
BPM | 40–250 | Adjusts the tempo if “BPM” is selected for FINE/MANUAL.
| |
CARRYOVER | OFF, ON | Specifies whether the effect sound is carried over (ON) or not carried over (OFF) when you turn off the effect.
| |
3 | OUTPUT | STEREO, DRY/EFFECT | Specifies the output mode. STEREO: The direct (dry) sound is mixed with the effect (wet) sound, and output from the OUTPUT A (MONO) and OUTPUT B jacks. DRY/EFFECT: The effect (wet) sound is output from the OUTPUT A (MONO) jack, and the direct (dry) sound is output from the OUTPUT B jack. |
– | – |
| |
– | – |
| |
4 | CTL1 TARGET | OFF, BALANCE, F.BACK, FINE/MANUAL, TAP | Selects the parameter to control from a footswitch connected to CTL1.
|
CTL1 MODE | MOMENT, TOGGLE | Selects the operation mode for the footswitch that’s connected to CTL1.
| |
CTL1 VALUE | 100:0–100:100–0:100, 0–100, BPM | Sets the value for the parameter that’s controlled from a footswitch connected to CTL1.
| |
5 | CTL2 TARGET | OFF, BALANCE, F.BACK, FINE/MANUAL, TAP | Selects the parameter to control from a footswitch connected to CTL2.
|
CTL2 MODE | MOMENT, TOGGLE | Selects the operation mode for the footswitch connected to CTL2.
| |
CTL2 VALUE | 100:0–100:100–0:100, 0–100, BPM | Selects the value for the parameter that’s controlled from a footswitch connected to CTL2.
| |
6 | EXP TARGET | OFF, BALANCE, F.BACK, FINE/MANUAL | Sets the parameter controlled by an expression pedal connected to EXP. |
EXP MIN | 100:0–100:100–0:100, 0–100, BPM | Sets the minimum value for the parameter controlled by an expression pedal connected to EXP. | |
EXP MAX | 100:0–100:100–0:100, 0–100, BPM | Sets the maximum value for the parameter controlled by an expression pedal connected to EXP. | |
7 | PEDAL MODE | MOMENT, TOGGLE | Selects the operation mode for the pedal switch on the PX-1. When PEDAL MODE is set to “TOGGLE”, you can long-press the pedal switch to use tap input. |
ACTION | OFF Ó ON, ON Ó OFF | Sets how the pedal switch on this unit operates when PEDAL MODE is set to “MOMENT”. | |
– | – |
|