Main specifications
Sample Rate | 48 kHz |
AD Conversion | 24 bits + AF method AF method (Adaptive Focus method) is a proprietary method from Roland and BOSS that vastly improves the signal-to-noise ratio (SN) of the AD and DA converters. |
DA Conversion | 32 bits |
Nominal Input Level | INPUT A (MONO), INPUT B: -20 dBu |
Maximum Input Level | INPUT A (MONO), INPUT B: +7 dBu |
Input Impedance | INPUT A (MONO), INPUT B: 1 MΩ |
Nominal Output Level | OUTPUT A (MONO), OUTPUT B: -20 dBu |
Maximum Output Level | OUTPUT A (MONO), OUTPUT B: +7 dBu |
Output Impedance | OUTPUT A (MONO), OUTPUT B: 1 kΩ |
Recommended Load Impedance | OUTPUT A (MONO), OUTPUT B: 10 kΩ or greater |
Bypass | Buffered bypass |
Controls | [SLOW] knob [FAST] knob [DRIVE] knob [LEVEL] knob [MODE] switch Pedal switch [RISE/FALL TIME] switch [DRIVE KNOB] switch |
Indicator | CHECK indicator (Used for indication of Tempo and check battery) VIRTUAL ROTOR |
Connectors | INPUT A (MONO) jack, INPUT B jack, OUTPUT A (MONO) jack, OUTPUT B jack: 1/4-inch phone type CTL/EXP jack: 1/4-inch TRS phone type DC IN jack |
Power Supply | Alkaline battery (9 V, 6LR61 or 6LF22, commercially available) AC adaptor (PSA series: sold separately) |
Current Draw | 115 mA |
Expected battery life under continuous use | Alkaline: Approx. 2.5 hours * These figures will vary depending on the actual conditions of use. |
Dimensions | 73 (W) x 129 (D) x 59 (H) mm |
Weight (including battery) | 450 g |
Accessories | Leaflet (“USING THE UNIT SAFELY”, “IMPORTANT NOTES”, and “Information”) Dry battery (9 V, 6LR61 or 6LF22) |
Options (sold separately) | AC adaptor: PSA series Footswitch: FS-5U Dual footswitch: FS-6, FS-7 Expression pedal: FV-500H, FV-500L, EV-30, Roland EV-5 |
- 0 dBu = 0.775 Vrms
- This document explains the specifications of the product at the time that the document was issued. For the latest information, refer to the Roland website.