Using a footswitch

You can connect a footswitch to the SPEED jack (CTL/EXP jack) to switch between SLOW/FAST and operate the brake.

Footswitch

CTL1 function

CTL2 function

FS-5U

Toggle between SLOW/FAST

----------------------

FS-5U x 2, FS-6, FS-7

Toggle between SLOW/FAST

Operate the brake

NOTE

When the footswitch is connected, the pedal switch on this unit is limited to switching the effect on/off. (Toggling between SLOW/FAST cannot be done with the pedal switch in this case.)

Operating the brake

You can operate the brake to stop the rotation of the rotor.

  1. Press footswitch CTL2.
  2. The rotor stops rotating.
  3. The time until the rotor stops rotating depends on the position of the [RISE/FALL TIME] switch. When the switch is on the SLOW side, the time until rotation stops is longer; and when the switch is on the FAST side, the time until rotation stops is shorter.
  4. To release the brake, press footswitch CTL2 again.