Turning the power on/off

Once everything is properly connected, be sure to follow the procedure below to turn on their power. If you turn on equipment in the wrong order, you risk causing malfunction or equipment failure.
Before turning the unit on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear some sound when switching the unit on/off. However, this is normal and does not indicate a malfunction.

Turning the power on

Connect a plug to the INPUT A (MONO) jack.
This turns on the RT-2.
The unit turns on with the effect off (the CHECK indicator is unlit).
MEMO
The CHECK indicator briefly lights up when this unit is turned on.
Turn on your amp or other audio equipment.

Turning the power off

Turn off your amp or other audio equipment.
Unplug the cable from the INPUT A (MONO) jack.
This turns off the RT-2.