SH-4d

Turn the [1] knob or press the [OSC 1]–[OSC 4] buttons to select an oscillator, and use the [2] knob to select the oscillator waveform.

Use the [OSC 1]–[OSC 4] sliders to set the volume for each oscillator.

Parameter	Controllers	Value	Explanation
Osc 1–4 Waveform	[2] knob (on the top screen only)	This sets the waveform.
		SAW	Sawtooth wave
		SQR	Square wave
		TRI	Triangle wave
		SINE	Sine wave
		RAMP	Ramp wave
		JUNO	Modulated sawtooth wave
		TRI2	Triangle wave variation
		TRI3	Triangle wave variation
		SINE2	Sine wave variation
		SSAW	SuperSAW
		NOISE	White noise
Osc 1–4 Coarse Tune	PITCH	-24–+24	Specifies the pitch in semitone steps (maximum ±2 octaves).
Osc 1–4 Fine Tune	SHIFT+PITCH	-50–+50	Specifies the pitch in cents (maximum ±50 cents).
Osc 1–4 PWM Depth	TIMBRE	0–63	Sets how much the LFO is applied (depth) to the PW (pulse width). The pulse width is modulated according to the LFO settings.
Osc 1–4 Pulse Width	SHIFT+TIMBRE	0–63	This effect changes the duty ratio of the pulse width to alter the waveform. You can use this effect with other waveforms besides SQR (square wave). A value of zero results in a 50:50% duty ratio.
Osc 1 Level	[OSC 1] slider	0–127	Sets the volume of OSC 1.
Osc 2 Level	[OSC 2] slider	0–127	Sets the volume of OSC 2.
Osc 3 Level	[OSC 3] slider	0–127	Sets the volume of OSC 3.
Osc 4 Level	[OSC 4] slider	0–127	Sets the volume of OSC 4.
Osc 1–4 Fat	–	0–63	Distorts the waveform and adds a frequency component one octave lower than the original waveform.
Osc 1-2, 3-4 Sync	–	OFF, SYNC	Implements the oscillator sync function that is provided by an analog synthesizer. Resets OSC 1 or 3 using the pitch cycle of OSC 2 or 4.
Osc 1–4 SSaw Detune	–	0–127	Adjusts how much the SuperSAW is detuned. Larger values create a greater detune effect. This is enabled only when “SSAW” is selected for the waveform.
Osc 1–4 LED Color	–	RED, ORANGE, YELLOW, GREEN, BLUE, PURPLE, PINK, WHITE, SKYBLUE, P.YELLOW, P.BLUE, P.PINK, L.RED, L.ORANGE, L.YELLOW, L.GREEN, P.GREEN, L.SKYBLUE, L.BLUE, L.PURPLE	Sets the oscillator section LED color for each oscillator.