Cross FM
Parameter | Controllers | Value | Explanation |
|---|---|---|---|
Carrier/Modulator Waveform | [2] knob (on the top screen only) | SINE, TRI, SQR, SAW | This sets the waveform. |
Coarse Tune | PITCH | -24–+24 | Specifies the pitch in semitone steps (maximum ±2 octaves). |
Fine Tune | SHIFT+PITCH | -50–+50 | Specifies the pitch in cents (maximum ±50 cents). |
Ratio | TIMBRE | 1.0–16.0 | Sets the frequency ratio between the carrier and modulator. |
Ratio Fine | SHIFT+TIMBRE | -50–+50 | Sets the frequency ratio between the carrier and modulator in smaller steps. |
Mod Env Atk | [OSC 1] slider | 0–1023 | Sets the attack time of the modulation envelope. |
Mod Env Dcy/Rel | [OSC 2] slider | 0–1023 | Sets the decay and release times of the modulation envelope. |
Mod Env Sus | [OSC 3] slider | 0–511 | Sets the sustain level of the modulation envelope. |
Mod Depth | [OSC 4] slider | 0–63 | Sets the intensity of the modulation envelope. Larger values produce a greater change with the modulation envelope. |
Carrier/Modulator Pulse Width | - | 0–63 | This effect changes the duty ratio of the pulse width to alter the waveform. You can use this effect with other waveforms besides SQR (square wave).
|
Carrier/Modulator PWM Depth | - | 0–63 | Sets how much the LFO is applied (depth) to the PW (pulse width). The pulse width is modulated according to the LFO settings. |
Carrier/Modulator Fat | - | 0–63 | Distorts the waveform and adds a frequency component one octave lower than the original waveform. |