DRAWING
Use the [1] and [2] knobs to set the waveform shape.
When you press the [ENTER] button, the cursor moves automatically, so you can draw the waveform by turning only the [2] knob.
Parameter | Controllers | Value | Explanation |
|---|---|---|---|
Wave Step 1–32 | [2] knob, [ä] [å] buttons (on the top screen only) | -72–+72 | Sets the value for each step in the waveform data. |
Coarse Tune | PITCH | -24–+24 | Specifies the pitch in semitone steps (maximum ±2 octaves). |
Wave Edge | TIMBRE | 0–127 | Sets how smoothly the steps are connected when playing back a waveform. Smaller values produce smoother transitions between steps. |
Step 1–8 | [OSC 1] slider | -72–+72 | Sets the values for steps 1–8 in the waveform data. |
Step 9–16 | [OSC 2] slider | -72–+72 | Sets the values for steps 9–16 in the waveform data. |
Step 17–24 | [OSC 3] slider | -72–+72 | Sets the values for steps 17–24 in the waveform data. |
Step 25–32 | [OSC 4] slider | -72–+72 | Sets the value for steps 25–32 in the waveform data. |
Step 1–8 Slope | [OSC 1] button + [OSC 1] slider | -18–+18 | Sets the slope of the straight lines that connect steps 1 through 8 in the waveform data. |
Step 9–16 Slope | [OSC 2] button + [OSC 2] slider | -18–+18 | Sets the slope of the straight lines that connect steps 9 through 16 in the waveform data. |
Step 17–24 Slope | [OSC 3] button + [OSC 3] slider | -18–+18 | Sets the slope of the straight lines that connect steps 17 through 24 in the waveform data. |
Step 25–32 Slope | [OSC 4] button + [OSC 4] slider | -18–+18 | Sets the slope of the straight lines that connect steps 25 through 32 in the waveform data. |