SBF-325 (Flanger)
This effect reproduces Roland’s SBF-325 analog flanger.
It provides three types of flanging effect (which adds a metallic resonance to the original sound) and a chorus-type effect.
Parameter | Value | Explanation |
|---|---|---|
Mode | Types of flanging effect | |
FL1 | A typical mono flanger | |
FL2 | A stereo flanger that preserves the stereo positioning of the original sound | |
FL3 | A cross-mix flanger that produces a more intense effect | |
CHO | A chorus effect | |
Rate Sync | OFF, ON | If this is ON, the rate synchronizes with the tempo of the rhythm. |
Rate | 0.02–5.00 [Hz] | Modulation frequency of the flanger effect |
Rate Note | ||
Depth | 0–127 | Modulation depth of the flanger effect |
Manual | 0–127 | Center frequency at which the flanger effect is applied |
Feedback | 0–127 | Amount by which the flanging effect is boosted If Mode is CHO, this setting is ignored. |
RMod Phase | NORM, INV | Phase of the right channel modulation: Normally, you will leave this at Normal (NORM). If you specify Inverted (INV), the modulation (upward/downward movement) of the right channel is inverted. |
L Phase | NORM, INV | Phase when mixing the flanging sound with the original sound NORM: normal phase INV: inverse phase |
R Phase | NORM, INV | |
Level | 0–127 | Output Level |