2V PShifter (2-voice pitch shifter)
Shifts the pitch of the original sound.
This 2-voice pitch shifter has two pitch shifters, and can add two pitch shifted sounds to the original sound.
Parameter | Value | Explanation |
|---|---|---|
P1Coarse | -24–+12 [sem] | Adjusts the pitch of Pitch Shift 1 in semitone steps. |
P1 Fine | -100–+100 | Adjusts the pitch of Pitch Shift Pitch 1 in 2-cent steps. |
P1 Dly Sync | OFF, ON | If this is ON, the rate synchronizes with the tempo of the rhythm. |
P1D.Time | 1–1300 | Delay time from the direct sound until the Pitch Shift 1 sound is heard |
P1DRate Nt | ||
P1 Feedback | -98–+98 [%] | Adjusts the proportion of the pitch shifted sound that is fed back into the effect. Negative (-) settings will invert the phase. |
P1 Pan | L64–63R | Stereo location of the Pitch Shift 1 sound |
P1 Level | 0–127 | Volume of the Pitch Shift 1 sound |
P2Coarse | -24–+12 [sem] | Settings of the Pitch Shift 2 sound. The parameters are the same as for the Pitch Shift 1 sound. |
P2 Fine | -100–+100 | |
P2 Dly Sync | OFF, ON | |
P2D.Time | 1–1300 | |
P2DRate Nt | ||
P2 Feedback | -98–+98 [%] | |
P2 Pan | L64–63R | |
P2 Level | 0–127 | |
Low Gain | -15–+15 [dB] | Amount of boost/cut for the low-frequency range |
High Gain | -15–+15 [dB] | Amount of boost/cut for the high-frequency range |
Balance | D100:0W–D0:100W | Volume balance between the direct sound (D) and the pitch shifted sound (W) |
Level | 0–127 | Output Level |