Using the MFX effects

You can select and use the effects you like for the MFX effects.

  1. While holding down the [MFX] button, turn the [VALUE] knob or the [CTRL 3] knob to select the effect to use.

  3. MEMO

    You can also use pads [1]–[16] instead of the [VALUE] knob or the [CTRL 3] knob to select an effect.

    To use pads [1]–[16] to select effects from #17 and up, hold down the [MFX] button and press the [DJFX LOOPER] button.

    To use pads [1]–[16] to select effects from #33 and up, hold down the [MFX] button and press the [ISOLATOR] button.

  4. After selecting the effect, take your finger off the [MFX] button.
  5. The effect turns on, and the effect edit screen appears.
  7. Play back a sample.
  8. Use the [CTRL 1]–[CTRL 3] knobs to edit the parameter.
  9. You can also access the effect sub-parameters by holding down the [VALUE] knob and operating the knobs.