Configuring the sampling settings (RECORD SETTING)

Here you can configure the settings for sampling, such as the recording level, as well as apply input effects to the sound input from an external source.

  1. In sample mode, press the [REC] button.
  2. The unit enters sampling standby mode.
  4. Sets the sample length (number of measures).

  5. Controller

    Value

    Explanation

    [CTRL 2] knob

    1-32, ∞

    Sets the sample length (number of measures).

    [SHIFT] button + [CTRL 2] knob

    1/4–7/4

    Specifies the time signature.

  6. Press the [RECORD SETTING] button.
  7. The input setting screen appears.
  9. Use the controllers to edit the parameters.

Controller

Parameter

Value

Explanation

[CTRL 1] knob

REC BPM

40.0–200.0

Specifies the tempo.Use the [CTRL 1] knob while holding down the [SHIFT] button to set more precise values.

You can also set the tempo using the tap tempo function.

“Setting the tempo in time with the rhythm (Tap Tempo)”

[SHIFT] button + [CTRL 1] knob

[CTRL 2] knob

ROUTING

This selects the source to sample (the input source).

Mix

Samples the mixed audio from this unit (the playback audio) and the input from an external source.

ExtIn

Samples only the audio input from an external device.

[SHIFT] button + [CTRL 3] knob

PAN

L:50–R:50

Adjusts the pan position (the left-right volume balance when sampling).

[CTRL 3] knob

LEVEL

0–127

Adjust the recording level.