Playing back a sample from the marker position

You can play back a sample from the position of the marker that’s set for that sample.

  1. Press pad [13] or [15].
  2. The corresponding samples play back.
  3. Hold down the [SHIFT] button and press pads [1]–[16].
  4. The samples play back from the marker positions set for the samples.
  5. The relationship between the markers where playback begins and the pads are as follows.

CH1 sample

CH2 sample

1: Beginning of sample

2: Marker 1

3: Beginning of sample

4: Marker 1

5: Marker 2

6: Marker 3

7: Marker 2

8: Marker 3

9: Marker 4

10: Marker 5

11: Marker 4

12: Marker 5

13: Marker 6

14: Marker 7

15: Marker 6

16: Marker 7

MEMO

  1. Markers up through the seventh marker from the beginning of the sample are recognized in DJ mode.
    Markers from the eighth marker onwards are ignored (and cannot be selected).
  2. When you press pads [1]–[16] while holding down the [SHIFT] button, playback begins immediately from the specified marker, even if a sample is already playing back.
  3. If you press the [REMAIN] button while holding down the [SHIFT] button, the [SHIFT] button remains in a pressed-down state, even after you take your fingers off the buttons.
    This makes it easier to select a marker and play back. Press the [EXIT] button to cancel this behavior.