EFX SETTING

FAVORITE

Parameter	Value	Explanation
Routing	TYPE A, TYPE B	Selects the routing (connection) of the bus to which effects are assigned. “Configuring the effect routing”
FAVORITE	Bypass, 1–16	Selects the combination of effects assigned to BUS 3 and BUS 4. “Changing the effects assigned to BUS 3 and BUS 4”

Parameter

Value

Explanation

Routing

TYPE A, TYPE B

Selects the routing (connection) of the bus to which effects are assigned.

“Configuring the effect routing”

FAVORITE

Bypass, 1–16

Selects the combination of effects assigned to BUS 3 and BUS 4.

“Changing the effects assigned to BUS 3 and BUS 4”

BUS 3, BUS 4

Parameter	Value	Explanation
EFX Type	Bypass, 303 VinylSim, 404 VinylSim, Cassette Sim, Lo-fi, Downer, Compressor, Equalizer, Isolator, Super Filter, Filter+Drive, WrmSaturator, Overdrive, Distortion, Crusher, Ring Mod, SBF, Resonator, Hyper-Reso, Chromatic PS, Reverb, Ha-Dou, Zan-Zou, Sync Delay, TimeCtrlDly, Ko-Da-Ma, Tape Echo, Chorus, JUNO Chorus, Flanger, Phaser, Wah, Slicer, Tremolo/Pan, To-Gu-Ro, DJFX Looper, Scatter, SX Reverb, SX Delay, Cloud Delay	Selects the effects assigned to BUS 3 or BUS 4. For details on the parameters of each effect, refer to “MFX List”.

Parameter

Value

Explanation

EFX Type

Bypass, 303 VinylSim, 404 VinylSim, Cassette Sim, Lo-fi, Downer, Compressor, Equalizer, Isolator, Super Filter, Filter+Drive, WrmSaturator, Overdrive, Distortion, Crusher, Ring Mod, SBF, Resonator, Hyper-Reso, Chromatic PS, Reverb, Ha-Dou, Zan-Zou, Sync Delay, TimeCtrlDly, Ko-Da-Ma, Tape Echo, Chorus, JUNO Chorus, Flanger, Phaser, Wah, Slicer, Tremolo/Pan, To-Gu-Ro, DJFX Looper, Scatter, SX Reverb, SX Delay, Cloud Delay

Selects the effects assigned to BUS 3 or BUS 4.

For details on the parameters of each effect, refer to “MFX List”.

DIRECT

Parameter	Value	Explanation
Direct FX1–Direct FX5	Filter+Drive, Resonator, Sync Delay, Isolator, DJFX Looper, Scatter, Downer, Ha-Dou, Ko-Da-Ma, Zan-Zou, To-Gu-Ro, SBF, Stopper, Tape Echo, TimeCtrlDly, Super Filter, WrmSaturator, 303 VinylSim, 404 VinylSim, Cassette Sim, Lo-fi, Reverb, Chorus, JUNO Chorus, Flanger, Phaser, Wah, Slicer, Tremolo/Pan, Chromatic PS, Hyper-Reso, Ring Mod, Crusher, Overdrive, Distortion, Equalizer, Compressor, SX Reverb, SX Delay, Cloud Delay, Back Spin	You can assign the effects you like to the effect buttons on the top panel. For details on the parameters of each effect, refer to “MFX List”.

Parameter

Value

Explanation

Direct FX1–Direct FX5

Filter+Drive, Resonator, Sync Delay, Isolator, DJFX Looper, Scatter, Downer, Ha-Dou, Ko-Da-Ma, Zan-Zou, To-Gu-Ro, SBF, Stopper, Tape Echo, TimeCtrlDly, Super Filter, WrmSaturator, 303 VinylSim, 404 VinylSim, Cassette Sim, Lo-fi, Reverb, Chorus, JUNO Chorus, Flanger, Phaser, Wah, Slicer, Tremolo/Pan, Chromatic PS, Hyper-Reso, Ring Mod, Crusher, Overdrive, Distortion, Equalizer, Compressor, SX Reverb, SX Delay, Cloud Delay, Back Spin

You can assign the effects you like to the effect buttons on the top panel.

For details on the parameters of each effect, refer to “MFX List”.

OTHER

Parameter	Value	Explanation
Mute Bus	This individually selects the bus to mute with Mute Bus.
	ALL	Both BUS 1 and BUS 2 are muted.
	BUS	Only the bus selected with the [BUS FX] button is muted.
Input FX	Bypass, Auto Pitch (), Vocoder (), Harmony (), Gt Amp Sim (), Chorus, JUNO Chorus, Reverb, TimeCtrlDly, Chromatic PS, Downer, WrmSaturator, 303 VinylSim, 404 VinylSim, Cassette Sim, Lo-fi, Equalizer, Compressor Effects marked with an (*) are for INPUT FX only.	You can apply effects to the audio that’s inputted to this unit. For details on the parameters of each effect, refer to “MFX List”.
Input Bus	You can set the bus to which the playback audio signals coming into the INPUT jack are sent (meaning which effects are used).
	DRY	The signal is not sent to BUS 1, BUS 2 (the BUS 1 and BUS 2 effects are not used).
	BUS1, BUS2	The signal is sent to BUS 1 or BUS 2. The effects set for BUS 1 and BUS 2 are used.
DRY Routing	This sets the routing for audio sent to the DRY bus.
	DRY	Audio is not sent through BUS 1–BUS 4 (no effects are applied).
	BUS3	Audio is inserted just before BUS 3. The BUS 3 and BUS 4 effects are applied.
MFX TOP	Scatter, Downer, Ha-Dou, Ko-Da-Ma, Zan-Zou, To-Gu-Ro, SBF, Stopper, Tape Echo, TimeCtrlDly, Super Filter, WrmSaturator, 303 VinylSim, 404 VinylSim, Cassette Sim, Lo-fi, Reverb, Chorus, JUNO Chorus, Flanger, Phaser, Wah, Slicer, Tremolo/Pan, Chromatic PS, Hyper-Reso, Ring Mod, Crusher, Overdrive, Distortion, Equalizer, Compressor, SX Reverb, SX Delay, Cloud Delay, Back Spin	Sets the MFX that’s used when this unit is turned on. For details on the parameters of each effect, refer to “MFX List”.