Shortcuts that use the [SHIFT] button
While holding down the [SHIFT] button | Function | Explanation |
|---|---|---|
Pad [1] | FIXED VELOCITY | Sets the sample’s velocity so that it always plays back at 127 (the maximum). |
Pad [2] | 16 VELOCITY | Changes a sample’s velocity (volume) in steps when it plays back. |
Pad [3] | CUE | Adjusts the balance of the audio you monitor via the PHONES jack. |
Pad [4] | CHROMATIC | Lets you play back samples (changing their pitches) as a chromatic scale with the pads. |
Pad [5] | EXCHANGE | Exchanges (swaps) the sample or pattern data saved in different pads. |
Pad [6] | INIT PARAM | Initializes the sample parameters for the selected pad. |
Pad [7] | PAD LINK | Lets you play back all the pads at the same time that are assigned to a group, by using a single pad. |
Pad [8] | MUTE GROUP | Groups together samples that you don’t want to play together (samples that you don’t want layered). |
Pad [9] | METRONOME | Turns the metronome on/off. |
Pad [10] | COUNT-IN | Adds a count-in before sampling or pattern recording begins. |
Pad [11] | TAP TEMPO | Lets you set the tempo in an intuitive way by tapping the pad in time, as if you were clapping out the beat. |
Pad [12] | GAIN | Displays the UTILITY MENU > SYSTEM > GAIN tab. |
Pad [13] | UTILITY | Displays the UTILITY MENU screen. |
Pad [14] | IMPORT/EXPORT | Displays the UTILITY MENU > IMPORT (IMPORT/EXPORT MENU). |
Pad [15] | PAD SETTING | Displays the UTILITY MENU > PAD SET (PAD SETTING). |
Pad [16] | EFX SETTING | Displays the UTILITY MENU > EFX SET (EFX SETTING) screen. |
[BUS FX] button | MUTE BUS | Temporarily turns off the audio sent to the bus (the sample playback sound or the sound inputted to the INPUT jack), and outputs only the sound of the effect. |
[HOLD] button | PAUSE | Pauses the sample that’s currently playing back. |
[EXT SOURCE] button | INPUT SETTING | Displays the input settings screen. |
[SUB PAD] button | PROJECT | Displays the SELECT PROJECT screen. |
[MARK] button (at least three seconds) | SAVE EFX PARAMETER | Saves the main parameters of the effects assigned to BUS 1 and BUS 2. |
[PITCH/SPEED] button | ENVELOPE | Sets how the volume changes when the sample plays back. |
[START/END] button | CHOP | Splits the sample at the marker positions, and assigns the resulting samples to separate pads. |
[PATTERN SELECT] button | UNDO | Undoes the data you just inputted (recorded).
|
[ROLL] button | ROLL SET | This shows how to set the roll interval (how fast the roll repeats). |
[REVERSE] button + pads [1]–[16] | Pad MUTE | Switches the pad mute on/off. |
[REVERSE] button + [REMAIN] button | Pad MUTE MODE | Keeps the [SHIFT] and [REVERSE] buttons in “pressed-down” state. |
[LOOP] button | PING-PONG LOOP | Loops the sample by repeatedly playing back forward and then backward. |
[GATE] button | GATE ALL ON/OFF | Turns the GATE parameter for all samples in the selected bank on/off. |
[BPM SYNC] button | SYNC ALL ON/OFF | Turns the BPM SYNC parameter for all samples in the selected bank on/off. |
[REC] button | TR-REC | Switches to pattern recording using TR-REC. This lets you record a sample onto the pattern that’s playing back.
|
Bank [A/F]–[E/J] buttons | BANK VOLUME | Adjusts the volume for the specified bank overall. |
[REMAIN] button (at least three seconds) | LIVE MODE | Use this to disable buttons that are not used when playing live (sampling and edit-related buttons). |
[COPY] button | BANK PROTECT | This function prevents the samples and patterns assigned to a pad from being copied, overwritten by editing or accidentally deleted. |
[VALUE] knob (press) | MARK | Switches the function to be recalled when you press the [MARK] button.
|
[RESAMPLE] button | SAMPLE MERGE MODE | Switches to sample merge mode. |
[RECORD SETTING] button | SOUND GENERATOR MODE | Switches to sound generator mode. |
[EXIT] button | STOP | Stops the playback of all samples. |