Importing a project from the SP-404SX/SP-404A (IMPORT PROJECT)

You can use an SD card to import projects into this unit that were created on a SP-404SX/SP-404A.

Using an SD card that was formatted on the SP-404MK2

  1. Save the “SP-404SX” project folder that was created on the SP-404SX/SP-404A to the “IMPORT” folder of the SD card.
  2. Insert the SD card into the SD card slot of this unit.
  3. Hold down the [SHIFT] button and press the pad [14].
  4. The IMPORT/EXPORT MENU screen appears.
  5. Turn the [VALUE] knob to select “IMPORT from SD-CARD” and press the [VALUE] knob.
  6. Turn the [VALUE] knob to select “PROJECT(SX)” and press the [VALUE] knob.
  7. Press pads [1]–[16] to select the number of the project to import.
  8. Press the [VALUE] knob to select “SP-404X”.
  9. The data is converted, and the SP-404SX/SP-404A project is loaded.

Using an SD card that’s being used with the SP-404SX/SP-404A

  1. Insert the SD card that’s being used with theSP-404SX/SP-404A into the SD card slot of this unit.
  2. Hold down the [SHIFT] button and press the pad [14].
  3. The IMPORT/EXPORT MENU screen appears.
  4. Turn the [VALUE] knob to select “IMPORT from SD-CARD” and press the [VALUE] knob.
  5. Turn the [VALUE] knob to select “PROJECT(SX)” and press the [VALUE] knob.
  6. The message “FOLD ERROR” appears.
  7. Press the [ROLL] button.
  8. Press pads [1]–[16] to select the number of the project to import.
  9. Press the [VALUE] knob to select “SP-404X”.
  10. The data is converted, and the SP-404SX/SP-404A project is loaded.