Exporting a project (EXPORT PROJECT)

You can export projects to an SD card if you want to use them on another SP-404MK2.

  1. Insert the SD card to which the samples are to be exported into the SD card slot of this unit.
  2. Hold down the [SHIFT] button and press the pad [13].
  3. The UTILITY MENU screen appears.
  4. Turn the [VALUE] knob to select “IMPORT”.
  5. The IMPORT/EXPORT MENU screen appears.
  6. MEMO

    From the top screen, you can also make this screen appear by pressing pad [14] while holding down the [SHIFT] button.

  7. Turn the [VALUE] knob to select “EXPORT to SD-CARD” and press the [VALUE] knob.
  8. The EXPORT SAMPLE / PROJECT screen appears.
  9. Use the [VALUE] knob to select “PROJECT”, and press the [VALUE] knob.
  10. Press the pads of the projects that you want to export to the SD card.
  11. The pads light up orange.
  12. Cell_header

    Pad status

    Explanation

    Unlit (dark orange)

    Pad for which a project hasn’t been created (empty pad)

    Blinking orange

    Pad for which a project has been created

    Lit orange

    Pad containing a project to be exported to SD card (pad to export)

  13. You can also select multiple projects (pads) to export. When doing so, if you decide not to export a certain project, press its pad again to deselect it (the pad blinks orange).
  14. After you’ve selected the projects to export, press the [VALUE] knob.
  15. The selected projects are saved in the “EXPORT PROJECT” folder of the SD card (Importing/exporting (using the SD card)).

NOTE

Never turn off the power or remove the SD card while the screen indicates “Working...”.