Shortcuts that use the [SHIFT] button


While holding down the [SHIFT] button	Function	Explanation
Pad [1]	FIXED VELOCITY	Sets the sample’s velocity so that it always plays back at 127 (the maximum).
Pad [2]	16 VELOCITY	Changes a sample’s velocity (volume) in steps when it plays back.
Pad [3]	CUE	Adjusts the balance of the audio you monitor via the PHONES jack.
Pad [4]	CHROMATIC	Lets you play back samples (changing their pitches) as a chromatic scale with the pads.
Pad [5]	EXCHANGE	Exchanges (swaps) the sample or pattern data saved in different pads.
Pad [6]	INIT PARAM	Initializes the sample parameters for the selected pad.
Pad [7]	PAD LINK	Lets you play back all the pads at the same time that are assigned to a group, by using a single pad.
Pad [8]	MUTE GROUP	Groups together samples that you don’t want to play together (samples that you don’t want layered).
Pad [9]	METRONOME	Turns the metronome on/off.
Pad [10]	COUNT-IN	Adds a count-in before sampling or pattern recording begins.
Pad [11]	TAP TEMPO	Lets you set the tempo in an intuitive way by tapping the pad in time, as if you were clapping out the beat.
Pad [12]	GAIN	Displays the UTILITY MENU > SYSTEM > GAIN tab.
Pad [13]	UTILITY	Displays the UTILITY MENU screen.
Pad [14]	IMPORT/EXPORT	Displays the UTILITY MENU > IMPORT (IMPORT/EXPORT MENU).
Pad [15]	PAD SETTING	Displays the UTILITY MENU > PAD SET (PAD SETTING).
Pad [16]	EFX SETTING	Displays the UTILITY MENU > EFX SET (EFX SETTING) screen.
[BUS FX] button	MUTE BUS	Temporarily turns off the audio sent to the bus (the sample playback sound or the sound inputted to the INPUT jack), and outputs only the sound of the effect.
[HOLD] button	PAUSE	Pauses the sample that’s currently playing back.
[EXT SOURCE] button	INPUT SETTING	Displays the input settings screen.
[SUB PAD] button	PROJECT	Displays the SELECT PROJECT screen.
[MARK] button (at least three seconds)	SAVE EFX PARAMETER	Saves the main parameters of the effects assigned to BUS 1 and BUS 2.
[PITCH/SPEED] button	ENVELOPE	Sets how the volume changes when the sample plays back.
[START/END] button	CHOP	Splits the sample at the marker positions, and assigns the resulting samples to separate pads.
[PATTERN SELECT] button	UNDO	Undoes the data you just inputted (recorded). Enabled only when recording a pattern
[ROLL] button	ROLL SET	This shows how to set the roll interval (how fast the roll repeats).
[REVERSE] button + pads [1]–[16]	Pad MUTE	Switches the pad mute on/off.
[REVERSE] button + [REMAIN] button	Pad MUTE MODE	Keeps the [SHIFT] and [REVERSE] buttons in “pressed-down” state.
[LOOP] button	PING-PONG LOOP	Loops the sample by repeatedly playing back forward and then backward.
[GATE] button	GATE ALL ON/OFF	Turns the GATE parameter for all samples in the selected bank on/off.
[BPM SYNC] button	SYNC ALL ON/OFF	Turns the BPM SYNC parameter for all samples in the selected bank on/off.
[REC] button	TR-REC	Switches to pattern recording using TR-REC. This lets you record a sample onto the pattern that’s playing back. Enabled only when playing back a pattern
Bank [A/F]–[E/J] buttons	BANK VOLUME	Adjusts the volume for the specified bank overall.
[REMAIN] button (at least three seconds)	LIVE MODE	Use this to disable buttons that are not used when playing live (sampling and edit-related buttons).
[COPY] button	BANK PROTECT	This function prevents the samples and patterns assigned to a pad from being copied, overwritten by editing or accidentally deleted.
[VALUE] knob (press)	MARK	Switches the function to be recalled when you press the [MARK] button. Switches between “SBS *** (skip-back sampling)” and “Looper”.
[RESAMPLE] button	SAMPLE MERGE MODE	Switches to sample merge mode.
[RECORD SETTING] button	SOUND GENERATOR MODE	Switches to sound generator mode.
[EXIT] button	STOP	Stops the playback of all samples.