Selecting a scene

Here’s how to select and play with the various scenes.

  1. Press the [SCENE] button.
  2. The SCENE screen or the SELECT SCENE screen appears. Press the [SCENE] button to toggle between these two screens.
  4. Turn the [SELECT] knob to select the scene.
  5. You can also press the [INC] and [DEC] buttons to select scenes.
  6. Press the [1]–[8] buttons to directly select the first digit.
  7. You can also hold down the [SHIFT] button and press buttons [1] (A)–[8] (H) to directly select a bank.
  8. When SELECT SCENE screen is shown, press the [SELECT] knob to confirm.

MEMO

Banks are indicated as a combination (A–H) × (A–H). Using the combination of banks and numbers, you can select a total of 512 scenes from AA1 through HH8.

Using the SCENE screen

Controller

Explanation

[SELECT] knob

Turn

Selects the scene.

Press

The SELECT SCENE screen appears.

[ã] [â] buttons

The information shown on the top screen changes.

[DEC] [INC] buttons

Selects the scene.

[SCENE] button

The SELECT SCENE screen appears.

Using the SELECT SCENE screen

Controller

Explanation

[SELECT] knob

Turn

Moves the cursor up and down.

Selects the scene.

Press

Confirms the change and moves the cursor sideways.

The scene is confirmed, and the display returns to the SCENE screen.

When you press this while holding down the [SHIFT] button:

Swaps (exchanges) scenes.

  1. Use the [SELECT] knob to select the source scene, and press the [SELECT] knob.
  2. Use the [SELECT] knob to select the destination scene, and press the [SELECT] knob.

[ã] [â] buttons

Moves the cursor horizontally.

[DEC] [INC] buttons

Moves the cursor up and down.

[EXIT] button

The selected scene is canceled, and the display returns to the SCENE screen.