Pedal

These parameters configure the pedal settings.

Parameter

Explanation

Pedal 1 Polarity

Selects the polarity of the pedals connected to the PEDAL CTRL 1, 2/L and 3/C jacks.

Some pedals work the opposite when the pedal is depressed or released. In this case, use the “REVERSE” setting.

Pedal 2 Polarity

Pedal 3 Polarity

Hold Pedal Polarity

Selects the polarity of the pedal connected to the HOLD/R jack.
Some pedals work the opposite when the pedal is depressed or released. In this case, use the “REVERSE” setting.

Continuous Hold Pedal

When set to “ON”, the damper pedal connected to the HOLD/R jack (such as the DP-10 or RPU-3, sold separately) supports half-pedaling. When you enable half-pedal support, you can adjust how much the sound rings out by pressing the damper pedal. This is effective when used with piano tones.