Assign Parameter

Parameter name

Explanation

Source

SYS: Uses the parameters set for the system.
SCENE: Uses the parameters set for the scene.

Polarity

Specifies the polarity of the pedals connected to the PEDAL CTRL 1, 2/L and 3/C jacks.

Mode

Specifies how the button operates.
LATCH: The effect toggles each time you press the button.
MOMENTARY: The effect you set is applied only while you are pressing the button.

 

All (parameters that can be set in common)

Parameter name

Explanation

OFF

No function is assigned.

CC01–31, 33–95

Controller number 1–31, 33–95

BEND

Applies a pitch-bend effect.

BEND DOWN

Applies a pitch-bend effect as when the pitch bend lever is moved downward.

BEND UP

Applies a pitch-bend effect as when the pitch bend lever is moved upward.

AFTERTOUCH

Assigns aftertouch.

LEVEL

Assigns the part volume.

PAN

Assigns the part pan.

PART SW

Assigns the part on/off.

 

Organ

Parameter name

Explanation

WHEEL BRAKE

Alternately switches the brake on/off for the tonewheel.

WHEEL SPEED UP

When this is ON, the tonewheel spins faster, changing the pitch.

ROTARY SPEED

Assigns the parameters for ORGAN EDIT.

ROTARY BRAKE

ROTARY SW

OVERDRIVE SW

DRIVE

VIB/CHO SW

RING MOD SW

RING MOD FREQ

RING MOD SENSE

DELAY SW

DELAY TIME

DELAY FEEDBACK

DELAY BALANCE

REVERB SW

REVERB TIME

REVERB BALANCE

 

A.Piano

Parameter name

Explanation

STEREO WIDTH

Assigns the parameters for A.PIANO EDIT.

BRIGHTNESS

 

E.Piano

Parameter name

Explanation

DETUNE

Assigns the parameters for E.PIANO EDIT.

SOUND LIFT

FX CTRL1

FX CTRL2

FX CTRL3

TREM RATE

TREM DEPTH

AMP DRIVE

AMP BASS

AMP TREBLE

EPIANO MFX SW

EPIANO TREMOLO SW

EPIANO AMP SW

 

Synth A/Synth B

Parameter name

Explanation

ATTACK

Assigns the parameters for SYNTH A EDIT/SYNTH B EDIT.

RELEASE

CUTOFF

FX CTRL1

FX CTRL2

MONO/POLY

RESONANCE

MFX SW

 

System

Parameter name

Explanation

TAP TEMPO

Assigns the tap tempo function.

NEXT SCENE

Selects the next scene.

PREV SCENE

Selects the previous scene.

DEC

The same effect is applied as when the [DEC] button on the panel is pressed.

INC

The same effect is applied as when the [INC] button on the panel is pressed.

TOTAL FX: MFX SW

Toggles between on/off for the TOTAL EFFECTS MFX.

TOTAL FX: DELAY SW

Toggles between on/off for the TOTAL EFFECTS DELAY.

TOTAL FX: REVERB SW

Toggles between on/off for the TOTAL EFFECTS REVERB.

COMP SW

Turns MASTER COMP on/off.

EQ SW

Turns MASTER EQ on/off.

TFX CTRL1

Assigns the [CTRL1] knob for TOTAL EFFECTS MFX.

TFX CTRL2

Assigns the [CTRL2] knob for TOTAL EFFECTS MFX.

DELAY LEVEL

Assigns the [LEVEL] knob for TOTAL EFFECTS DELAY.

DELAY TIME

Assigns the [TIME] knob for TOTAL EFFECTS DELAY.

DELAY FEEDBACK

Assigns the [FEEDBACK] knob for TOTAL EFFECTS DELAY.

REVERB LEVEL

Assigns the [LEVEL] knob for TOTAL EFFECTS REVERB.

REVERB TIME

Assigns the [TIME] knob for TOTAL EFFECTS REVERB.

SHIFT

The same effect is applied as when the [SHIFT] button on the panel is pressed.