Mic Parameter

Mic

Parameter

Explanation

Mic Sw

Turns mic input on/off.

This is the same operation as the MIC IN [ON/OFF] button on the panel.

Mic Level

The mic input level

This is the same operation as the MIC IN [LEVEL] knob on the panel.

Mic Pan

Mic input pan

Mic Gain

Input gain of the mic

If the mic input is distorted, lower the gain.

Reverb Send

Sets the amount of signal sent to the reverb

Output

Output destination of the audio that’s input from the mic

NS Sw

Turns the noise suppressor on/off.

Suppresses background noise during silence.

NS Release

Time from when noise suppression starts until the volume reaches 0

NS Threshold

Volume at which noise suppression starts to be applied

LowCut Sw

Turns low-band audio cut on/off for the mic input.

LowCut Freq

Center frequency of the low band to cut

MFX

Parameter

Explanation

Type

The part MFX type

The parameters to set for each effect change according to the effect type.

Switch

Switches the MFX on/off.

The MFX for the Mic part is the same as the Total FX MFX. For details on the parameters for each type, refer to the “V-STAGE MFX Parameter List” (Roland website).

Reverb

Parameter

Explanation

Type

Reverb type

Switch

Reverb on/off

Reverb Level

The output level of the sound with reverb applied.

Reverb Parameters

The editable parameters differ depending on the type of reverb you selected in Reverb Type.

The reverb for the mic is the same as the Total FX Reverb. For details on the parameters for each type, refer to “Reverb Parameter”.

Mic EQ

Parameter

Explanation

Switch

Mic EQ on/off

Input Gain

Amount of boost/cut for the input to the mic EQ

Low Gain

Amount of low range boost/cut

Low Freq

Center frequency of the low range

Mid1 Gain

Amount of midrange 1 boost/cut

Mid1 Freq

Center frequency of midrange 1

Mid1 Q

Bandwidth of midrange 1
Higher values make the bandwidth narrower.

Mid2 Gain

Amount of midrange 2 boost/cut

Mid2 Freq

Center frequency of midrange 2

Mid2 Q

Bandwidth of midrange 2
Higher values make the bandwidth narrower.

Mid3 Gain

Amount of midrange 3 boost/cut

Mid3 Freq

Center frequency of midrange 3

Mid3 Q

Bandwidth of midrange 3
Higher values make the bandwidth narrower.

High Gain

Amount of high range boost/cut

High Freq

Center frequency of the high range