Output destination setting examples

Here are some examples of output destination settings.

Example 1: Default settings

With these settings, all sound is output from the PHONES and MASTER OUT jacks for monitoring.

The sounds from KICK and SNARE are divided up and output to the DIRECT OUT 1 and 2 jacks, which signals are sent to your PA system.

Example 2: Sending the same audio for monitoring and PA

With these settings, the same sound is output from the PHONES jacks, the MASTER OUT jacks and the DIRECT OUT 1, 2 jacks.

The sound being monitored by the performer will be the same as the sound sent to the PA system.

• The master compressor and master EQ effects are not applied to DIRECT OUT.

Example 3: Performing while listening to a click/guide track

With these settings, all sound is output to the PHONES jacks for monitoring.

By outputting CLICK (the click and song click track output) and USB IN SUB (the sound that is input to the USB COMPUTER port) only from headphones, only the player can hear the click or guide track while they perform.