Connecting a WT-10 (Wireless Trigger Adapter) to a drum pad or cymbal

Connect the cables included with the WT-10 to the PAD1 and PAD2 jacks of the WT-10 and the drum pad/cymbal jacks.
The WT-10 turns on when you insert a plug into the PAD1 jack (the indicator briefly lights up blue and then goes dark).

NOTE

When connecting cables to the WT-10, hold the WT-10 firmly.

Example of attaching the WT-10 to the VH-10 hi-hat

When connecting only one drum pad or cymbal to the WT-10, use the PAD1 jack. The PAD1 jack also functions as a power switch.
When connecting the Roland VH-10 hi-hat, the CY-16R-T cymbal (both sold separately) or the like, use both the PAD1 and PAD2 jacks.