Example 1: Copying a drum kit (KIT)

  1. Select “KIT” on the COPY screen, and then press the [ENTER] button.
  2. The COPY KIT screen appears.
  4. Press the [F1] (USER)–[F3] (SD CARD) buttons to select the item you want to edit.
  5. Cell_header

    Button

    Explanation

    [F1] (USER) button

    Copies from user memory. You can swap (exchange) the copy source and copy destination kits, but only if the copy source is in the User memory.

    [F2] (PRESET) button

    Copies drum kits of preset memory. Choose this if you want to return to the factory-set drum kit settings.

    • User samples that are assigned to a factory-set drum kit cannot be copied.

    [F3] (SD CARD) button

    Copies drum kits from backup data saved on an SD card.

  6. Use the cursor buttons to select a parameter, and use the [-] [+] buttons or the dial to make the copy settings.
  7. USER
  9. PRESET
  11. SD CARD

  13. MEMO

    If you are copying backup data that does not include user samples, you can’t select the “With User Samples” check box.

  14. Press the [F6] (COPY) button.
  15. By pressing the [F5] (EXCHANGE) button, you can exchange user memories (USER only).
  16. A confirmation message appears.
  18. If you decide to cancel, select “CANCEL” and press the [ENTER] button.
  19. Select “OK” and press the [ENTER] button.
  20. The drum kit is copied.