Connecting via wireless LAN (Wi-Fi)
You can connect your video switcher to a wireless LAN router using a LAN cable, so that you can wirelessly connect to the iPad via the wireless LAN router.
- See the Owner’s Manual of the wireless LAN router for how to use that device.
- The wireless LAN (Wi-Fi) connection speed and connectivity may be unstable in certain network environments.
- Connect the DIRECT STREAM port or the LAN CONTROL connector of the video switcher to the LAN port of the wireless LAN router with an LAN cable.
- * Do not connect the LAN cable to the Internet or WAN port of your wireless LAN router.
- Turn on the wireless LAN router, and enable DHCP server functionality on the wireless LAN router.
- Turn on the video switcher.
- Press the [MENU] button Ó “Network” Ó “LAN Setup” Ó set “Configure” to “Using DHCP”, and press the [VALUE] knob.
- The IP address, subnet mask and default gateway are acquired automatically.
- Use the [VALUE] knob to select “Network Password”, and press the [VALUE] knob.
- The Network Password screen appears.
- Set a network password.
- The password you set here is required when accessing the video switcher from VenuSet.
- Use the [VALUE] knob to select “Network Information”, and press the [VALUE] knob.
- The Network Information screen appears.
- When “Connected” is shown in “Link Status”, you’re finished with the video switcher connection settings.
- Press the [MENU] button to close the menu.
- Connect your iPad to the Wi-Fi (wireless LAN) network.
- Turn Wi-Fi on in the Settings menu.
- From the list of networks, tap to select the wireless LAN router to which the video switcher is connected.
- Enter the password listed on the wireless LAN router, and tap “Connect”.
- Launch VenuSet.
- Tap the [status icon].
- * If the app is already connected to a different device or using a different connection method, the status icon may show “Online”.
- Tap the [LAN] button.
- Input the “IP Address” and “Network Password” fields, and tap the [Connect] button.
Input field | Explanation |
IP Address | Input the IP address of the video switcher. You can check this information by pressing the video switcher’s [MENU] button and selecting “Network” Ó “Network Information”. |
Network Password | Input the network password set on the video switcher. |
When the status icon changes to “Online (LAN)”, the connection is established.