Top panel

 

Number

Name

Explanation

1

EXP1 pedal

Controls the effect of pitch shifting.

Press the pedal firmly with your toes to activate the EXP1 switch.

Indicator: Lights when the effect being controlled with the EXP1 switch is on.

  • When you operate the EXP1 pedal, be careful not to get your fingers pinched between the movable parts and the unit. In places where small children are present, make sure that an adult provides supervision and guidance.

2

Display

Shows the memory, effect settings and so on.

3

[EFFECT] button

Switches between effect mode and effect edit mode.

Set the amount of pitch shift, detune and so forth for the pitch shifter.

4

[MEMORY] button

Switches between memory mode and memory/system setting mode.

This button switches between memories (1–30) or saves them.
Refer to “Saving and switching between memories” for details.

Long-press the [MEMORY] button to switch to the WRITE screen.

5

Select knob

Selects (turn) or confirms (press) the memory, parameter or setting value.

6

[EFFECT] switch

Turns the effect on/off.

Indicator: Lights when the [EFFECT] switch is on.

  • In the settings screen, this switch is indicated as "SW1".
  • Press both the [EFFECT] switch and the [TUNE DOWN] switch to toggle SW MODE.

7

[TUNE DOWN] switch

Adds downtuning and capo effects.

Indicator: Lights when the [TUNE DOWN] switch is on.

  • In the settings screen, this switch is indicated as “SW2”.
  • Press both the [EFFECT] switch and the [TUNE DOWN] switch to toggle SW MODE.