Overview of the SPD-SX PRO (save/load, import/export, saving parameters to this unit)
SAVE ALL / LOAD ALL
When you backup the entire unit or save/load data, all data from the kits, system and waves is included.
Ø “Backing up All Settings to a USB Flash Drive (SAVE)”
Ø “Loading Backup Data for All of this Unit’s Settings from a USB Flash Drive (LOAD)”
SAVE 1 KIT / LOAD 1 KIT
You can save and load data for individual kits.
This also saves or loads the waves that are used by the kit.
Ø “Backing up a Kit to a USB Flash Drive (SAVE 1 KIT)”
Ø “Loading Kit Backup Data from a USB Flash Drive (LOAD 1 KIT)”
Wave import/export
You can import waves (in WAV, AIFF or MP3 format) that are located in the IMPORT folder of the USB flash drive into the user bank.
You can also export the user bank waves to a USB flash drive.
Ø “Importing an Audio File (IMPORT)”
Ø “Saving a Wave to a USB Flash Drive (EXPORT)”
Saving parameters to this unit
Any changes that have been made to the kit, system or wave parameters are saved when you turn the [POWER] switch off.
NOTE
The parameters are not saved if the AC adaptor gets pulled out and the power supply is abruptly disconnected.
To save the settings before you turn off the power, execute the “WRITE” function.
Ø “Saving the Current Settings (TOOLS-WRITE)”
Loading a SPD-SX backup file
You can convert any kit from the SPD-SX backup data and load it into the SPD-SX PRO.