INPUT section

Shows the channel you control with the dial on the BRIDGE CAST ONE.

This assigns input sources to the MUTE/ASSIGN [MIC], [CHAT] and [GAME] buttons.

• You can store different settings for each setting of the USB connection and [GAME EFFECTS] setting switches.

The volume for the input source you assigned changes when you operate the dial on the BRIDGE CAST ONE.

MIC

The audio of the dynamic mic, condenser mic connected to the MIC jack, or the audio of the headset mic connected to the HEADSET jack

• When this is set to “MIC”, you must select the mic type.
  â Selecting the type of mic

AUX

Audio input from the AUX jack

CHAT

GAME (SPEAKER)

MUSIC

SYSTEM

Audio input from the USB port

• This can be set when the USB connection setting switch is set to “PC”.

CONSOLE (SPEAKER)

Audio input from the USB port

• This can be set when the USB connection setting switch is set to “CONSOLE”.

SFX

Sound effects (SFX A, SFX B, SFX BEEP)

This shows which bus is being operated. Click the icon to mute/unmute the audio.

Mic signal that is not routed through a bus

• Only when the input source is “MIC”

Audio sent to the PERSONAL MIX bus

Audio sent to the STREAM MIX bus

Drag the volume sliders to adjust the volume.

You can use the cursor keys on the keyboard to fine-tune the settings.

Indicates the volume levels.

Selects whether the mic audio (not routed through a bus) or the PERSONAL MIX bus is to be controlled.

Click the white bar to switch between buses.

â About the buses

Links/unlinks the two buses (STREAM MIX, PERSONAL MIX).

Link

Use the dial on the BRIDGE CAST ONE to adjust the volumes of the PERSONAL MIX and STREAM MIX. You can adjust the input level while retaining the volume balance for each bus.

• When the input source is “MIC”, the MIC audio (not routed through a bus), STREAM MIX bus and PERSONAL MIX bus are linked.

Unlink

Use the dial on the BRIDGE CAST ONE to adjust the volume of the PERSONAL MIX bus.

• If the input source is “MIC”, this follows the setting of the MIC/PERSONAL selector switch.

This sets the functions for the MUTE/ASSIGN [MIC], [CHAT] and [GAME] buttons.

CH. MUTE ALL (*1)

Mutes/unmutes audio for the channels routed to the STREAM MIX and PERSONAL MIX buses.

When the input source is “MIC”, this mutes/unmutes the mic audio (not routed through a bus) and the mic audio routed to the STREAM MIX/PERSONAL MIX buses.

CH. MUTE TO STREAM MIX (*1)

Mutes/unmutes audio for the channels routed to the STREAM MIX bus.

CH. MUTE TO PERSONAL MIX (*1)

Mutes/unmutes audio for the channels routed to the PERSONAL MIX bus.

Mutes/unmutes the mic audio (not routed through a bus) and the mic audio routed to the PERSONAL MIX bus, when the input source is “MIC”.

SFX A, SFX B

Plays the sound effect registered for SFX A or SFX B.

You can register a music file (.wav) that you like to SFX A and SFX B.

â Registering a sound effect

SFX BEEP

Plays a beep sound.

MUTE OUTPUT ALL

Mutes all output audio.

MUTE STREAM OUT

Mutes/unmutes audio for the STREAM MIX bus audio that’s output from the USB port.

MUTE LINE OUT

Mutes/unmutes the audio output from the LINE OUT jack.

MUTE PHONES

Mutes/unmutes the audio that’s output from the headphones or headset.

PROFILE 1–5

Switches between profile 1–5.

GAME EFFECTS 1–5

Recalls game effect presets 1–5.

GAME EFFECTS OFF

Turns the game effect off.

VOICE TRANSFORMER 1–5

Recalls voice transformer presets 1–5.

MIDI CC 1–4

Transmits MIDI control change messages 1–4 from the MIDI output port (CTRL) of the USB port.

• This can be set when the USB connection setting switch is set to “PC”.

SOUND EFFECTS A –D (BGM CAST)

Plays back the sound effects you selected for SOUND EFFECTS A–D.

â Using sound effects

HOT KEY

Recalls the keyboard shortcut keys.

â Hot key settings

REVERB SW

Turns the voice transformer reverb on/off.

BGM CAST PLAY/STOP

Starts/stops BGM CAST playback.

BGM CAST NEXT SONG

Switches to the next BGM CAST song.

PHONES/LINE OUT

Toggles the output of PHONES and LINE OUT.

When you press the button, the PHONES audio is muted if it is currently unmuted, and unmuted if it is currently muted.

LINE OUT works the opposite of PHONES.

CH. LEVEL RESET

Sets the volume of the input source assigned to the respective channel to “100”.

A popup window for setting the volume of SFX A and SFX B appears.

To adjust the volume balance between SFX A and SFX B, use the SFX A or SFX B slider (adjustable from 0 to 100).

A popup screen for selecting the sound effect appears.

â Registering a sound effect

Sets the color for the MUTE/ASSIGN indicators (MIC, CHAT and GAME).

The colors of the MUTE/ASSIGN indicators (MIC, CHAT and GAME) and LED color values change with the motion of the LED color slider.