Top panel (this unit)

 

 

 

You can use the “BRIDGE CAST” dedicated app to access more detailed settings. For details, refer to “About the BRIDGE CAST app”.

 

About the buses

“Buses” refer to the destinations where the audio for each input source is sent.

There are two kinds of buses on this unit, the “STREAM MIX” bus and the “PERSONAL MIX” bus. The STREAM MIX bus can be used for streaming settings, whereas the PERSONAL MIX bus can be used for monitoring settings. Configure each bus according to your needs.

The audio signals sent to the buses are mixed and then output.

The mic audio can be output without going through a bus (meaning that the mic audio is not mixed with other audio). The mic audio can be used for voice chats.

 

MEMO

The dial always adjusts the volume of the PERSONAL MIX bus. By default, the STREAM MIX and PERSONAL MIX buses are linked, so that both buses are set to the same volume.

When you use BRIDGE CAST app, you can unlink the buses. When the buses are unlinked, the STREAM MIX bus volume can be adjusted in BRIDGE CAST app.
â BRIDGE CAST app: “HOME” tab Ó “MIX LINK button”

 

  1. 48V indicator
  2. This is lit when phantom power is on.
  3. Turn phantom power on when you connect a condenser mic that requires a phantom power supply to the MIC connector.
  4. When connecting a dynamic mic or a condenser mic that operates on battery power, make sure to set the phantom power switch to off. These types of mics may malfunction when supplied with phantom power.
  5. â Configuring the mic settings on this unit
  6. â BRIDGE CAST app: “MIC SETUP” tab Ó “MIC TYPE”
  8. MUTE/ASSIGN [MIC] [CHAT] [GAME] buttons
  9. Use these buttons to mute the audio and to execute the functions assigned to the buttons.
  10. You can assign the functions to the buttons in the BRIDGE CAST app: “HOME” tab Ó “MUTE/ASSIGN button functions”.
  12. MUTE/ASSIGN indicators (MIC, CHAT, GAME)
  13. These light up in the colors set for the MIC, CHAT, and GAME channels, and go dark when the mute function assigned to the respective button is on.

  14. MEMO

    You can change the indicator colors.

    â BRIDGE CAST app: “HOME” tab Ó “LED color slider”

  16. Dial
  17. Adjusts the volume of the input source assigned to the respective channel.
  18. Press the dial to switch the respective channel.

  19. MEMO

    You can also use the dial to adjust the volume of the input sources assigned to the CHAT and GAME channels at the same time.

    â BRIDGE CAST app: “HOME” tab Ó “DIAL MODE”

  21. Channel indicator
  22. Illuminates with the color for the respective channel.
  23. When DIAL MODE is “BALANCE”, the color of the CHAT channel is displayed in the left half and the color of the GAME channel is displayed in the right half.
  25. Channel level meter
  26. Indicates the input level for the respective channel.
  27. This shows the output volume when you operate the dial.

  28. MEMO

    You can disable the level meter so that only the volume is always shown.

    â BRIDGE CAST app: “SYSTEM” tab Ó “INDICATOR TYPE”

  30. [VOICE TRANSFORMER] button
  31. Turns the voice transformer (voice changer, reverb) on/off. When on, the button is lit.

  32. MEMO

    1. The voice changer and reverb can be turned on and off individually.
      â Turning the effects on/off individually
    3. You can change the button’s color.
      â Setting the LED color of the [VOICE TRANSFORMER] button
    5. You can set the voice transformer so that it can’t be turned off.
      â BRIDGE CAST app: “VOICE TRANSFORMER” tab Ó “LOCK”
  34. [GAME EFFECTS] button
  35. Turns the game effects (virtual surround, equalizer, limiter) on/off. When on, the button is lit.

  36. MEMO

    1. Virtual surround, equalizer and limiter can be turned on and off individually.
      â Turning the effects on/off individually
    3. You can change the button’s color.
      â Setting the LED color of the [GAME EFFECTS] button
  38. No_header

    Switching between profiles

    Turn the dial while pressing the [VOICE TRANSFORMER] and [GAME EFFECTS] buttons at the same time to toggle between Profiles (1-5).

  40. [PHONES] knob
  41. Adjusts the volume of the headphones/headset.

MEMO

  1. The [PHONES] knob can also be used to adjust the volume output from the LINE OUT jack.
    â BRIDGE CAST app: “HOME” tab Ó “PHONES/LINE OUT LINK button”
  3. You can change the maximum volume of the headphones/headset.
    Change this setting only after turning the headphones/headset volume all the way down.
    â BRIDGE CAST app: “SYSTEM” tab Ó “PHONES GAIN”