Configuring the settings of this unit

This shows you how to configure the settings that apply to the entire unit, such as part settings, system settings and so on.

MEMO

If the [SEQ] button is lit, press the [SEQ] button to make it go dark (which turns sequencer mode off).

 

  1. Press the [MENU] button.
  3. The [MENU] button lights up.
  4. Use the [VALUE] knob to select the parameter to set, and press the [VALUE] knob.
  5. The parameter setting screen appears.
  6. Turn the [VALUE] knob to set the value, and press the [VALUE] knob.
  7. To exit the settings, press the [MENU] button.

MEMO

  1. You can also press a corresponding step button to select the parameter items. In the following settings screens, you can also select the parameter item with the step buttons.
  2. If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.

Step buttons

Parameter (as displayed)

Explanation

[1]

PArt

Configures the settings for the selected part.

“Configuring the parts”

[2]

Nod

Configures the modulation settings.

“Configuring the modulation”

[3]

KEy

Configures the keyboard settings.

“Configuring the keyboard settings”

[4]

Nidi

Configures the MIDI settings.

“Configuring the MIDI settings”

[5]

SYS

Configures the system settings.

“Configuring the system settings”

[6]

UtiL

Select this to use the utilities.

“Using the utilities”