Setting the note loudness and length (velocity/gate time)
Here’s how to set the loudness or strength of the notes (from the scale on the keys) you play, as well as the length of each note.
- The sound generator of this unit does not support velocity.
These settings are applied to velocity messages outputted via MIDI.
- Select the pattern to edit (Selecting a pattern).
- Press the [SEQ] button to make its indicator light up.
- Sequencer mode turns on, and the current tempo is shown.
- Hold down the [1]–[16] buttons and press the [VALUE] knob to select the step to edit.
- The step number to be edited is shown.
- Press the [VALUE] knob.
- The current velocity is shown.
Example indications
Explanation
U. 1
Velocity 1
U.127
Velocity 127
- Use the [VALUE] knob to select the velocity, and press the [VALUE] knob.
- The current gate time is shown.
Example indications
Explanation
G. 0
Gate time 0
G.100
Gate time 100
G.tie
Tie
- Use the [VALUE] knob to select the gate time, and press the [VALUE] knob.
- The display returns to the step number that is being edited. Press the [VALUE] knob to cycle through the display.
- To exit the settings, press the [MENU] button.
- The display returns to the current tempo.