2Voice Pitch Shifter
MEMO
- You can also press a corresponding step button to select the parameter items.
- If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.
Step buttons | Parameter | Value | Explanation |
|---|---|---|---|
[1] | type | PCH2 | Shifts the pitch of the dry sound. You can layer two pitch-shifted sounds onto the dry sound. |
[2] | Sľ | Off, On | Turns the effect on/off. |
[3] | 1.CrS | -24–12 (semitones) | Amount of pitch shift applied for pitch-shift 1 (in semitones) |
[4] | 1.Fin | -100–100 (cent) | Amount of pitch shift applied for pitch-shift 1 (in units of two cents) |
[5] | 1.dÆy | These are the settings for the pitch-shift 1 delay and feedback parameters. | |
[6] | 1.PAn | L 64–R 63 | Panning for pitch-shift 1 sound |
[7] | 1.LEU | 0–127 | Pitch-shift 1 volume |
[8] | 2.CrS | -24–12 (semitones) | Amount of pitch shift applied for pitch-shift 2 (in semitones) |
[9] | 2Fin | -100–100 (cent) | Amount of pitch shift applied for pitch-shift 2 (in units of two cents) |
[10] | 2.dÆy | These are the settings for the pitch-shift 2 delay and feedback parameters. | |
[11] | 2PAn | L 64–R 63 | Panning for pitch-shift 1 sound |
[12] | 2LEU | 0–127 | Pitch-shift 1 volume |
[13] | EQ.Lo | -15–15 (dB) | Amount of low range boost/cut |
[14] | EQ.Hi | -15–15 (dB) | Amount of high range boost/cut |
[15] | bAL | Volume balance between the effect sound and dry (original) sound | |
0–100 | 0 (Effect sound = 0: dry sound = 100) 100 (Effect sound = 100: dry sound = 0) | ||
[16] | LEU | 0–127 | Output level |
Delay and feedback parameters
Step buttons | Parameter | Value | Explanation |
|---|---|---|---|
[1] | Sync | Off, On | When this is “ON”, the effect synchronizes with the tempo of the rhythm. |
[2] | TiNE | 1–1300 | Time from when the dry sound is heard until the pitch-shifted sound is heard |
[3] | notE | ||
[4] | Fb | -98–98 (%) | Proportion of the pitch-shifted sound fed back into the effect (negative values invert the phase) |