Editing the effects for BUS 3 and BUS 4

Here’s how to edit the effects (BUS 3, BUS 4) applied to the overall sound.

MEMO

See “Editing the effects” for how to edit the effects (BUS 1, BUS 2) applied to a sample.

  1. Hold down the [SHIFT] button and press the pad [13].
  2. The UTILITY MENU screen appears.
  3. Use the [VALUE] knob to select “EFX SET” and press the [VALUE] knob.
  4. The effect setting screen appears.
  5. MEMO

    From the top screen, you can also make this screen appear by pressing pad [16] while holding down the [SHIFT] button.

  6. Use the [CTRL 3] knob to select “BUS 3” or “BUS 4”.
  7. Select the bus whose effect you wish to change.
  8. MEMO

    To edit BUS 3 and BUS 4, you must select a favorite from “FAVORITE 1” to “FAVORITE 16” in the “FAVORITE” tab screen.

  9. Turn the [VALUE] knob to set the parameter to edit.
  10. Use the [CTRL 1]–[CTRL 3] knobs to edit the parameter.
  11. To finish making settings, press the [EXIT] button.