CTL parameters


Parameter	Value	Description (pedal indicator color)
SW1A (SW1A FUNC) SW2A (SW2A FUNC) SW1B (SW1B FUNC) SW2B (SW2B FUNC)	This sets the functions of the footswitch. MEMO SW1 and SW2 have an “A” and a “B” setting, to which you can respectively assign functions. Use SW MODE to set whether to use either the A or the B function. The SW1+2 setting lets you switch between A and B by operating the footswitch.
	OFF	No function is assigned (indicator is dark).
	EFX	Turns the effect on/off (red).
	EFX:M	The effect turns on only while the switch is pressed (red).
	P.SHIFT	Turns the pitch shift on/off (green).
	P.SHIFT:M	The pitch shift turns on only while the switch is pressed (green).
	P+1OCT	Sets the pitch one octave higher (green).
	P+1OCT:M	The pitch is shifted one octave higher only while the switch is pressed (green).
	P-1OCT	Sets the pitch one octave lower (green).
	P-1OCT:M	The pitch is shifted one octave lower only while the switch is pressed (green).
	T.DN	Turns downtuning (tune down) on/off (green).
	T.DN:M	Downtuning (tune down) turns on only while the switch is pressed (green).
	DTNE	Turns detuning on/off (green).
	DTNE:M	Detuning turns on only while the switch is pressed (green).
	DIR	Turns the direct sound on/off (red).
	DIR:M	The direct sound turns on only while the switch is pressed (red).
	M.UP	Switches to the next memory (memory increment: blue).
	M.UP(D	Pressing the switch goes to the next memory (memory increment). Long-pressing the switch goes to the previous memory (memory decrement: blue).
	M.DN	Switches to the previous memory (memory decrement: blue).
	M.DN(U	Pressing the switch goes to the previous memory (memory decrement). Long-pressing the switch goes to the next memory (memory increment: blue).
	M.#1–M.#30	Switches to the memory number that was set (blue).
SW1+2 (SW1+2 FUNC)	OFF	No function is assigned.
	MODE1	Toggles SW MODE. The play mode screen (EFFECT/MEMORY) switches along with the toggling of the SW MODE.
	MODE2	Toggles SW MODE. When in MODE2, the screen does not change.
EXP1 (EXP1 FUNC) EXP2 (EXP2 FUNC)	Sets the expression pedal function. When you press the pedal with your toes, the setting value changes up through the value that’s set for the parameter of each function.
	OFF	No function is assigned.
	P.SHIFT	Controls the pitch shift amount.
	DTNE	Controls the detune amount.
	E.LVL	Controls the effect level.
	D.LVL	Controls the direct level.
	BAL	Controls the balance.
- SW (EXP1 SW FUNC)	Sets the function of the EXP1 switch.
	OFF	No function is assigned (indicator is dark).
	EFX	Turns the effect on/off (red).
	EFX:M	The effect turns on only while the switch is pressed (red).
	P.SHIFT	Turns the pitch shift on/off (green).
	P.SHIFT:M	The pitch shift turns on only while the switch is pressed (green).
	P+1OCT	Sets the pitch one octave higher (green).
	P+1OCT:M	The pitch is shifted one octave higher only while the switch is pressed (green).
	P-1OCT	Sets the pitch one octave lower (green).
	P-1OCT:M	The pitch is shifted one octave lower only while the switch is pressed (green).
	T.DN	Turns downtuning (tune down) on/off (green).
	T.DN:M	Downtuning (tune down) turns on only while the switch is pressed (green).
	DTNE	Turns detuning on/off (green).
	DTNE:M	Detuning turns on only while the switch is pressed (green).
	DIR	Turns the direct sound on/off (red).
	DIR:M	The direct sound turns on only while the switch is pressed (red).
CTL1 CTL2	This sets the function of the externally connected footswitch.
	OFF	No function is assigned (indicator is dark).
	EFX	Turns the effect on/off (red).
	EFX:M	The effect turns on only while the switch is pressed (red).
	PITCH	Turns the pitch shift on/off (green).
	PITCH:M	The pitch shift turns on only while the switch is pressed (green).
	P+1OCT	Sets the pitch one octave higher (green).
	P+1OCT:M	The pitch is shifted one octave higher only while the switch is pressed (green).
	P-1OCT	Sets the pitch one octave lower (green).
	P-1OCT:M	The pitch is shifted one octave lower only while the switch is pressed (green).
	T.DN	Turns downtuning (tune down) on/off (green).
	T.DN:M	Downtuning (tune down) turns on only while the switch is pressed (green).
	DTNE	Turns detuning on/off (green).
	DTNE:M	Detuning turns on only while the switch is pressed (green).
	DIR	Turns the direct sound on/off (red).
	DIR:M	The direct sound turns on only while the switch is pressed (red).
	SW MODE	Toggles SW MODE.
	M.UP	Switches to the next memory (memory increment: blue).
	M.UP(D	Pressing the switch goes to the next memory (memory increment). Long-pressing the switch goes to the previous memory (memory decrement: blue).
	M.DN	Switches to the previous memory (memory decrement: blue).
	M.DN(U	Pressing the switch goes to the previous memory (memory decrement). Long-pressing the switch goes to the next memory (memory increment: blue).
	M.#1–30	Switches to the memory number that was set (blue).