SYSTEM parameters
Parameter | Value | Explanation |
|---|---|---|
EXT MIN (MEMORY EXTENT MIN) | 1–30 | Sets the minimum value for the selectable memories. |
EXT MAX (MEMORY EXTENT MAX) | 1–30 | Sets the maximum value for the selectable memories. |
BYPASS | This sets the output of the bypass sound. | |
ANA | Outputs the analog through sound during bypass. | |
DSP | Outputs the DSP through sound during bypass. | |
EXP1 HOLD EXP2 HOLD | OFF | The operational status of the EXP1 (EXP1 FUNC) and EXP2 (EXP2 FUNC) is not carried over when memories are switched. Ø “CTL parameters” |
ON | The operational status of the EXP1 (EXP1 FUNC) and EXP2 (EXP2 FUNC) is carried over when memories are switched, if the setting is the same as the previous memory. Ø “CTL parameters” | |
EXP1 SW THRE (EXP1 SW THRESHOLD) | 1–10 | Sets the sensitivity of the EXP1 SW on/off. |
SW MODE | A, B | Determines whether you want to use the functions of SW1 and 2 in either the A or B configuration. The function to toggle is set by the CTL parameter. |
CONTRAST (DISPLAY CONTRAST) | 1–10 | Adjusts the screen contrast. |
AUTO OFF | Configures the AUTO OFF setting. | |
OFF | The power does not turn off automatically. | |
ON | The power turns off automatically when 20 minutes have passed since you last played or operated the unit. | |