Rear panel (this unit)

 

 

 

  1. MIC connector (XLR)
  2. Connect your microphone here. When a condenser mic that requires phantom power is connected, the MIC connector can supply phantom power (+48 V).
  3. Phantom power on this unit: DC 48 V, 6mA max.
  5. You must set the type of mic to be used and the input gain (sensitivity) in order to input audio from the mic.
  6. â Configuring the mic settings on this unit
  7. â BRIDGE CAST app: Selecting the type of mic, Adjusting the input gain (sensitivity) for the mic
  9. HEADSET jack (four-conductor stereo mini phone type)
  10. Connect your headphones or headset here.
  11. This jack outputs the audio from the PERSONAL MIX bus.
  12. You can also output audio from the STREAM MIX bus from this jack.
  13. â BRIDGE CAST app: “HOME” tab Ó “OUTPUT section” Ó “PHONES source selection switch”
  15. When using a headset, you can input the audio from the headset mic.
  16. Use a headset with a 3.5 mm CTIA-type mini plug (four-conductor).
  17. You must set the type of mic to be used and the input gain (sensitivity) in order to input audio from the mic.
  18. â Configuring the mic settings on this unit
  19. â BRIDGE CAST app: Selecting the type of mic, Adjusting the input gain (sensitivity) for the mic
  21. AUX jack (four-conductor stereo mini phone type)
  22. Connect this to your tablet, smartphone or similar device. This jack is compatible with four-conductor (TRRS) 3.5 mm mini plugs.
  23. When you use a four-conductor mini plug cable, you can input the audio from your smartphone and output the mic audio (mono mix) to your smartphone.
  24. With a three-conductor mini plug, only audio input is available.
  26. LINE OUT jack (stereo mini type)
  27. Connect this jack to your monitor speakers or other audio equipment. This is a 3.5 mm stereo mini plug.
  28. The output audio can be set on the menu screen Ó “OUTPUT” Ó “LINE OUT MODE” of the BRIDGE CAST app.
  30. USB port (USB Type-C®)
  31. Use the included USB cable to connect to your computer, video game console.
  32. The USB connection setting switch settings should be configured according to the device that’s connected.

  33. About bus power operation
  34. The unit operates on bus power. The unit automatically turns on when it receives power from the device it is connected to via the USB port.
  36. [GAME EFFECTS] setting switch
  37. Sets the input source that uses the game effect.
  38. No_header

    USB

    Computers, video game consoles connected to a USB port

    AUX

    Smartphone or other device connected to the AUX jack

  39. The MUTE/ASSIGN [GAME] button on the top panel also switches the input source.
  40. This lets you switch between settings without using a computer when you play games on a smartphone connected to the AUX port.
  42. USB connection setting switch
  43. Set this to “PC” or “CONSOLE”, according to which device you connect to the USB port.
  44. The unit determines the state of the USB connection setting switch when it starts up. Do not change the switch’s setting after starting up this unit.
  46. PC: when connecting to your computer
  47. This lets you transmit and receive audio and MIDI messages between multiple devices.
  48. The dedicated driver must be installed when you use the “PC” setting.
  49. â BRIDGE CAST app: Installing the BRIDGE CAST app and driver
  50. No_header

    Audio input (source)

    Audio output

    MIDI input/output

    Keyboard (HID) output

    CHAT

    GAME (SPEAKER)

    MUSIC

    SYSTEM

    MIC (mic audio: not routed through a bus)

    STREAM (STREAM MIX bus audio)

    SUB MIX (audio selected in the “OUTPUT” tab Ó “SUB MIX MODE” in the BRIDGE CAST app)

    BRIDGE CAST ONE CTRL (for transmitting/receiving MIDI messages)

    Outputs the hot key assigned to the MUTE/ASSIGN button.

  51. See the “MIDI Implementation Chart” (Roland website) for details on what MIDI messages can be transmitted and received.
  52. https://roland.cm/bridgecastone_om
  53. This unit is recognized as a MIDI device (“BRIDGE CAST ONE CTRL”) when accessed from a MIDI-compatible app on your computer.
  55. CONSOLE: when connecting a video game console
  56. This lets you transmit and receive the following audio signals.
  57. You can also connect a computer with the “CONSOLE” setting.
No_header

Audio input (source)

Audio output

CONSOLE (SPEAKER)

MIC (mic audio: not routed through a bus) or STREAM (STREAM MIX bus audio)

The audio output from the USB port can be set on the “HOME” tab Ó “OUTPUT” Ó “USB OUT MODE (CONSOLE)” tab in the BRIDGE CAST app.