Restoring the factory settings (factory reset)

  1. Turn off the RT-2 (unplug the cable from the INPUT A (MONO) jack).
  2. Set the [RISE/FALL TIME] switch to the “FAST” position.
  4. Set the [DRIVE KNOB] switch to the “BALANCE” position.
  6. Turn the [SLOW] knob to the maximum (MAX) setting.
  7. Turn all other knobs besides the [SLOW] knob to the minimum (MIN) setting.
  8. Set the [MODE] switch to the “II” position.
  10. Turn on the power by connecting a plug to the INPUT A (MONO) jack while holding down the pedal switch.
  11. The CHECK indicator slowly blinks orange.
  12. Press the pedal switch.
  13. The CHECK indicator rapidly blinks orange.
  14. Once the CHECK indicator lights up orange continuously, the RT-2 is restored to its factory settings.
  15. Turn off the power (unplug the cable from the INPUT A (MONO) jack).

Factory parameter settings

Parameter

Value

OUTPUT MODE

Ó“Selecting how the effect sound is output (OUTPUT MODE)”

Stereo output

EXP FUNCTION

Ó“Controlling the knob parameters using an expression pedal (EXP FUNCTION)”

Rotation speed (SLOW/FAST) of the rotary speaker

Noise suppressor

Ó“Configuring the noise suppressor”

Off

Pedal switch type

Ó“Changing how the pedal switch works”

Type 1 (on/off priority, long-press to switch between SLOW/FAST)

DRIVE

Ó“[DRIVE KNOB] switch”

Minimum

BALANCE

Ó“[DRIVE KNOB] switch”

Center