If you don’t need the power to turn off automatically, set the auto-off setting to “Off”.

* The power to this instrument turns off automatically to save energy after a certain amount of time (20 minutes by default) has passed since it was last played or since its buttons or controls were operated. (This is the auto-off function.)

NOTE

  1. If the power automatically turns off, any unsaved data is lost. Before the power turns off, save the data that you want to keep.
  2. If you don’t want the instrument to turn off automatically, set this to “Off”. Note that with the “Off” setting, the instrument may consume more power.
  3. You can simply turn the power back on after it has turned off automatically.

Changing the auto-off setting

  1. On the MENU screen, select “SYSTEM”, and then press the [SELECT] knob.
  2. The SYSTEM menu appears.
  3. Select “General” and press the [SELECT] knob.
  4. The General screen appears.
  5. Select “Auto Off” and change the setting.

  6. Parameter

    Value

    Explanation

    Auto Off

    Off

    The power does not turn off automatically.

    20 min (factory setting)

    The power will automatically turn off if no operation is performed for 20 minutes.

    240 min

    The power will automatically turn off if no operation is performed for 240 minutes (four hours).

  7. If you want to save the auto-off setting, press the [WRITE] button in the General screen.

 

NOTE

When the power shuts off due to auto-off, all of the unsaved edits that you’ve made are lost. You must save the settings if you want to keep them. For details, refer to “Saving a scene” and “Saving the system settings”.

 

Turning the power back on after auto-off

The [Ā] switch remains pressed in after the auto-off function turns off the power. Press the [Ā] switch to return the switch to its normal off position, and then press the [Ā] switch again to turn the power on again.