You can copy the settings from one channel to another.

  1. Click the channel to copy, or use the channel number select button to select the channel.


    You can select a range of channels.

    1. Click the starting channel for the range to select.
    2. While holding the [Shift] key on your computer’s keyboard, click the ending channel in the range to select.

      This is an example of what it looks like when channels 1 through 7 are selected as a range.



  2. Click the [Copy] button.

    This copies the selected channel settings.


    • You can also hold down the [Ctrl] key and press the [C] key on your computer to copy.
    • You can cut the data (which deletes the settings for the selected channel while copying them to the clipboard) by holding down the [Ctrl] key on your computer and pressing the [X] key.


  3. Click the channel you want to copy to, or use the channel number select button to select the channel.
  4. Click the [Paste] button.

    The channel settings you copied are pasted to the copy destination.


    You can also hold down the [Ctrl] key and press the [V] key on your computer to paste.


Pasting while incrementing the area number (Area Index Increment)

When copying the channel settings, you can paste while incrementing the area number by a fixed amount.

For instance, by setting the Area Index Increment (how much to increase the area number) to “1” and then copying and pasting, the area number of the channel to copy is incremented by one when pasting.

  • If the result of incrementing the Area Index Increment exceeds the number of area numbers, this sets the upper limit for the area number.
  • You can reduce the pasted area number by inputting a negative number for Area Index Increment.
  • If the result of inputting a negative value for the Area Index Increment goes below “1”, the area number is set to “1”.