These are the settings for the brightness of the indicators on the BRIDGE CAST as well as for what the level meters display.


  1. On the menu screen, click the “SYSTEM” tab and set the parameters in the respective menus.


    Menu Value Explanation

    LED BRIGHTNESS

    		 0–7

    Adjusts the brightness of all indicators.

    • Even with the minimum setting of “0”, the indicators do not go completely dark.
    • In save mode, the indicator brightness is limited. When in this mode, the brightness does not go above a certain level even when you increase the setting.

    INDICATOR TYPE

    		 Sets what is shown by the CH 1–4 level meters.
    LEVEL

    The volume is always shown.
    METER

    The level meters operate as a level meter that shows the input levels for each channel.

    The volume is shown instead when you operate the CH [1]–[4] knobs on this unit.

    MUTE DISPLAY

    		 When mute is on, this sets how the color indicators light up.
    BLINK The color indicators blink.
    OFF The color indicators go dark.

    PHONES GAIN

    Normal

    Boost 1

    Boost 2

    When this is set to “Boost 1” or “Boost 2”, this amplifies the headphone volume.
    [UPDATE] button –

    Updates the system program of the BRIDGE CAST. Click the [UPDATE] button and operate by following the instructions shown.