This is an example of how to connect the devices when you want to use your tablet or smartphone to have a voice chat while listening to the sound of the game.


  • To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
  • Before turning the unit on/off, always be sure to turn the volume down. Even with the volume turned down, you might hear some sound when switching the unit on/off. However, this is normal and does not indicate a malfunction.


  1. Connect your mic, headphones or other external equipment to this unit.
  2. Set the USB connection settings switch to “CONSOLE/MOBILE”.
  3. Plug your commercially available USB AC adaptor (at least 5 V/1.0 A) into the power outlet.

  4. Use either a commercially available USB cable or the included USB cable to connect a USB AC adaptor to the 5V port.

    This unit automatically turns on, and the indicators on the operating panel light up.

  5. Use a commercially available USB Type-C® to USB Type-C® cable to connect the USB port to your iPad or iPhone.

    When connecting to an iPad/iPhone that has a Lightning connector, use a Lightning to USB 3 Camera Adapter, available separately.

    • We recommend the use of Apple genuine products.

  6. Turn on your external equipment.

  7. Adjust the volume on this unit to ensure a listenable volume balance while testing the sound from the game app (iPad/iPhone), voice chat and mic.


About the Power Supply
  • This unit does not have a power switch. The power automatically turns on once you connect a USB AC adaptor (commercially available) to supply power.
  • This unit may operate in an erratic manner if you try to power it from your iPad/iPhone (bus power), due to insufficient bus power. Connect a commercially available USB AC adaptor (at least 5 V/1.0 A) into the 5V port.

  • To turn off the power, first turn off all external equipment and then unplug the USB cables in the following order.

    (1) USB cable connected to iPad/iPhone

    (2) USB cable connected to USB AC adaptor


Mic audio input

You must set the type of mic to be used and the input gain (sensitivity) in order to input audio from the mic.

â Selecting the type of mic to use

â Adjusting the input gain (sensitivity) for the mic


Adjusting the Volume

Operate the CH [1]–[4] knobs to adjust the volume.

Bus selection buttons CH [1] knob CH [2] knob CH [3] knob CH [4] knob

STREAM MIX (lit)

Volume for monitoring your own voice (mic audio)

Volume of the other party’s voice during voice chat

(AUX jack audio)

Game volume

(USB port audio)

 Sound effect volume
PERSONAL MIX (unlit)

Adjusts one of the following volumes.

  • Volume for monitoring your own voice (mic audio; default factory setting)

  • Volume of your own voice, as heard by the other party in the voice chat (mic audio output from the AUX jack)

Change the bus to be used beforehand as necessary.

Set which to use from the home screen in the BRIDGE CAST app.

Volume of the other party’s voice during voice chat

(AUX jack audio)

Game volume

(USB port audio)

 Sound effect volume

For details on the voice chat app settings, see the help contents or the owner’s manual for your app.


MUTE/ASSIGN [1]–[4] buttons

With the factory settings, the following functions are assigned.

MUTE/ASSIGN [1]–[3] buttons MUTE/ASSIGN [4] button

Mutes/unmutes the audio for each channel.

 Plays a sound effect (preset sound).

  • You can’t use the BRIDGE CAST app while an iPad/iPhone is connected to the USB port. Before connecting the iPad/iPhone, make the appropriate settings in the BRIDGE CAST app.

  • When you want to use the mic audio in a voice chat within the game app, change the settings so that only your voice is output via the USB port.

    From “OUTPUT” in the menu screen of the BRIDGE CAST app, set “USB OUT MODE (MOBILE/CONSOLE)” to “MIC”.