Configuring the settings of this unit

This shows you how to configure the settings that apply to the entire unit, such as part settings, system settings and so on.

MEMO

If the [SEQ] button is lit, press the [SEQ] button to make it go dark (which turns SEQ off).

Press the [MENU] button.
The [MENU] button lights up.
Use the [VALUE] knob to select the parameter to set, and press the [VALUE] knob.
The parameter setting screen appears.
Turn the [VALUE] knob to set the value, and press the [VALUE] knob.
To exit the settings, press the [MENU] button.

MEMO

You can also press a corresponding step button to select the parameter items. In the following settings screens, you can also select the parameter item with the step buttons.
If you’re viewing this content on your smartphone, we recommend that you turn your smartphone on its side for landscape mode.


Step buttons	Parameter (as displayed)	Explanation
[1]	PArt	Configures the settings for the selected part. “Configuring the parts”
[2]	ľ.P.	Configures the P-MOD (phase modulation) settings. “Configuring P-MOD”
[3]	ľ.S.	Configures the S-MOD (shaping modulation) settings. “Configuring S-MOD”
[4]	Nod	Configures the modulation settings. “Configuring the modulation”
[5]	UELO	Configures the velocity settings. “Configuring the velocity”
[6]	Eq	Configures the EQ settings. “Configuring the EQ”
[7]	S.LFO	Configures the step LFO settings. “Configuring the step LFO”
[8]	drAľ	Configures the DRAWING settings. “Configuring drawing”
[9]	KEy	Configures the keyboard settings. “Configuring the keyboard settings”
[10]	Nidi	Configures the MIDI settings. “Configuring the MIDI settings”
[11]	SYS	Configures the system settings. “Configuring the system settings”
[12]	UtiL	Select this to use the utilities. “Using the utilities”

Additional information