Here’s how to configure the functions that are called up when you long-press the pedal switch.

  1. With the power turned off (nothing should be plugged into the INPUT A jack), set the [MODE] knob to “11”.
  2. While holding down the pedal switch, turn on the power (by connecting a plug to the INPUT A jack).

  3. Turn the [ECHO] knob to select a function.

    Knob position Setting
    Minimum value

    When you long-press the pedal switch until the CHECK indicator lights up green, the unit enters tap input mode.

    Press the pedal switch at the tempo of the song you’re playing to specify a matching repeat rate.
    Maximum value TWIST is on while the pedal switch is pressed.


  4. Press the pedal switch to exit the settings.