1. With the power turned off (nothing should be plugged into the INPUT A jack), set the [MODE] knob to “8”.

  2. While holding down the pedal switch, turn on the power (by connecting a plug to the INPUT A jack).

  3. Turn the [ECHO] knob to select a sound.

    Knob position Function Explanation
    All the way counterclockwise Analog Bypass The audio input is outputted without change.
    All the way clockwise

    RE-201 Simulation

    Uses digital signal processing to recreate the sound of the direct sound going through a RE-201 preamp.


  4. Press the pedal switch to exit the settings.
  • When this is set to “RE-201 Simulation,” the simulation effect is still heard even when the effect is off.