You can turn the output of the direct sound off when you want to output only the effect’s sound, such as when you’re connecting this unit to the send/return of a mixer.

  1. With the power turned off (nothing should be plugged into the INPUT A jack), set the [MODE] knob to “7”.
  2. While holding down the pedal switch, turn on the power (by connecting a plug to the INPUT A jack).

  3. Turn the [ECHO] knob to select either on or off.

    Knob position Setting
    All the way counterclockwise Outputs the direct sound.
    All the way clockwise Does not output the direct sound.


  4. Press the pedal switch to exit the settings.